ssh_config

OpenSSH client configuration file

ssh obtains configuration data from:

command-line options
user's configuration file (~/.ssh/config)
system-wide configuration file (/etc/ssh/ssh_config)

Unless noted otherwise, for each parameter, the first value will be used.
Host-specific declarations should be given near the beginning of the file, and general defaults at the end.
Sections separated by Host specifications, are applied for hosts that match one of the patterns.
The matched host name is usually the one given on the command line (see the CanonicalizeHostname option for exceptions).

The file contains keyword-argument pairs, one per line.
Comments start with `#' and empty lines are ignores.
Arguments containing spaces must be be enclosed in quotes (") .
Options may be separated by whitespace or whitespace and `='; useful to avoid the need to quote whitespace when specifying configuration options using the ssh, scp, and sftp -o option. Keywords are case-insensitive and arguments are case-sensitive)

`Host [hostPattern`]	Declarations (up to `Host` or `Match` ) are used to for hosts that match `hostPattern`. `*` as a pattern provides global defaults. `host` is usually the `hostname` argument given on the command line (see the CanonicalizeHostname keyword for exceptions). A `hostPattern` entry may be negated by prefixing it with an exclamation mark (`!`). If a negated entry is matched, then the `Host` entry is ignored, regardless of whether any other patterns on the line match. Negated matches are useful to provide exceptions for wildcard matches. See PATTERNS. `hostPattern`s are seperated by white space.
`Match`	Restricts the following declarations (up to `Host` or `Match` ) are used only when: Match keyword are satisfied. Match conditions are specified using one or more criteria or the single token all which always matches. The available criteria keywords are: `canonical, final, exec, localnetwork, host, originalhost, Tag, user, and localuser`. The all criteria must appear alone or immediately after canonical or final. Other criteria may be combined arbitrarily. All criteria but all, canonical, and final require an argument. Criteria may be negated by prepending an exclamation mark (`!'). `canonical` matches only when the configuration file is being re-parsed after hostname canonicalization (see CanonicalizeHostname option). This may be useful to specify conditions that work with canonical host names only. `final` requests that the configuration be re-parsed (regardless of whether CanonicalizeHostname is enabled), and matches only during this final pass. If CanonicalizeHostname is enabled, then canonical and final match during the same pass. `exec` executes the specified command under the user's shell. If the command returns a zero exit status then the condition is considered true. Commands containing whitespace characters must be quoted. Arguments to exec accept the tokens described in TOKENS . The localnetwork keyword matches the addresses of active local network interfaces against the supplied list of networks in CIDR format. This may be convenient for varying the effective configuration on devices that roam between networks. Note that network address is not a trustworthy criteria in many situations (e.g. when the network is automatically configured using DHCP) and so caution should be applied if using it to control security-sensitive configuration. The other keywords' criteria must be single entries or comma-separated lists and may use the wildcard and negation operators described in the PATTERNS section. The criteria for the host keyword are matched against the target hostname, after any substitution by the Hostname or CanonicalizeHostname options. The originalhost keyword matches against the hostname as it was specified on the command-line. The tagged keyword matches a tag name specified by a prior Tag directive or on the ssh(1) command-line using the -P flag. The user keyword matches against the target username on the remote host. The localuser keyword matches against the name of the local user running ssh(1) (this keyword may be useful in system-wide ssh_config files).
`AddKeysToAgent`	Specifies whether keys should be automatically added to a running ssh-agent(1). If this option is set to yes and a key is loaded from a file, the key and its passphrase are added to the agent with the default lifetime, as if by ssh-add(1). If this option is set to ask, ssh(1) will require confirmation using the SSH_ASKPASS program before adding a key (see ssh-add(1) for details). If this option is set to confirm, each use of the key must be confirmed, as if the -c option was specified to ssh-add(1). If this option is set to no, no keys are added to the agent. Alternately, this option may be specified as a time interval using the format described in the TIME FORMATS section of sshd_config(5) to specify the key's lifetime in ssh-agent(1), after which it will automatically be removed. The argument must be no (the default), yes, confirm (optionally followed by a time interval), ask or a time interval.
`AddressFamily`	Specifies which address family to use when connecting. Valid arguments are any (the default), inet (use IPv4 only), or inet6 (use IPv6 only).
`BatchMode`	If set to yes, user interaction such as password prompts and host key confirmation requests will be disabled. This option is useful in scripts and other batch jobs where no user is present to interact with ssh(1). The argument must be yes or no (the default).
`BindAddress`	Use the specified address on the local machine as the source address of the connection. Only useful on systems with more than one address.
`BindInterface`	Use the address of the specified interface on the local machine as the source address of the connection.
`CanonicalDomains`	When CanonicalizeHostname is enabled, this option specifies the list of domain suffixes in which to search for the specified destination host.
`CanonicalizeFallbackLocal`	Specifies whether to fail with an error when hostname canonicalization fails. The default, yes, will attempt to look up the unqualified hostname using the system resolver's search rules. A value of no will cause ssh(1) to fail instantly if CanonicalizeHostname is enabled and the target hostname cannot be found in any of the domains specified by CanonicalDomains.
`CanonicalizeHostname`	Controls whether explicit hostname canonicalization is performed. The default, no, is not to perform any name rewriting and let the system resolver handle all hostname lookups. If set to yes then, for connections that do not use a ProxyCommand or ProxyJump, ssh(1) will attempt to canonicalize the hostname specified on the command line using the CanonicalDomains suffixes and CanonicalizePermittedCNAMEs rules. If CanonicalizeHostname is set to always, then canonicalization is applied to proxied connections too. If this option is enabled, then the configuration files are processed again using the new target name to pick up any new configuration in matching Host and Match stanzas. A value of none disables the use of a ProxyJump host.
`CanonicalizeMaxDots`	Specifies the maximum number of dot characters in a hostname before canonicalization is disabled. The default, 1, allows a single dot (i.e. hostname.subdomain).
`CanonicalizePermittedCNAMEs`	Specifies rules to determine whether CNAMEs should be followed when canonicalizing hostnames. The rules consist of one or more arguments of source_domain_list:target_domain_list, where source_domain_list is a pattern-list of domains that may follow CNAMEs in canonicalization, and target_domain_list is a pattern-list of domains that they may resolve to. For example, ".a.example.com:.b.example.com,.c.example.com" will allow hostnames matching ".a.example.com" to be canonicalized to names in the ".b.example.com" or ".c.example.com" domains. A single argument of "none" causes no CNAMEs to be considered for canonicalization. This is the default behaviour.
`CASignatureAlgorithms`	Specifies the algorithms that are allowed for signing of certificates by certificate authorities (CAs). The default is: `ssh-ed25519,ecdsa-sha2-nistp256, ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519@openssh.com, sk-ecdsa-sha2-nistp256@openssh.com, rsa-sha2-512,rsa-sha2-256`> If the specified list begins with a `+' character, then the specified algorithms will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing them. ssh(1) will not accept host certificates signed using algorithms other than those specified.
`CertificateFile`	Specifies a file from which the user's certificate is read. A corresponding private key must be provided separately in order to use this certificate either from an IdentityFile directive or -i flag to ssh(1), via ssh-agent(1), or via a PKCS11Provider or SecurityKeyProvider. Arguments to CertificateFile may use the tilde syntax to refer to a user's home directory, the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section. It is possible to have multiple certificate files specified in configuration files; these certificates will be tried in sequence. Multiple CertificateFile directives will add to the list of certificates used for authentication.
`CheckHostIP`	If set to yes, ssh(1) will additionally check the host IP address in the known_hosts file. This allows it to detect if a host key changed due to DNS spoofing and will add addresses of destination hosts to ~/.ssh/known_hosts in the process, regardless of the setting of StrictHostKeyChecking. If the option is set to no (the default), the check will not be executed.
`Ciphers`	Specifies the ciphers allowed and their order of preference. Multiple ciphers must be comma-separated. If the specified list begins with a `+' character, then the specified ciphers will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified ciphers (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified ciphers will be placed at the head of the default set. The supported ciphers are: `3des-cbc aes128-cbc aes192-cbc aes256-cbc aes128-ctr aes192-ctr aes256-ctr aes128-gcm@openssh.com aes256-gcm@openssh.com chacha20-poly1305@openssh.com` The default is: chacha20-poly1305@openssh.com, aes128-ctr,aes192-ctr,aes256-ctr, aes128-gcm@openssh.com,aes256-gcm@openssh.com The list of available ciphers may also be obtained using "ssh -Q cipher".
`ClearAllForwardings`	Specifies that all local, remote, and dynamic port forwardings specified in the configuration files or on the command line be cleared. This option is primarily useful when used from the ssh(1) command line to clear port forwardings set in configuration files, and is automatically set by scp(1) and sftp(1). The argument must be yes or no (the default).
`Compression`	Specifies whether to use compression. The argument must be yes or no (the default).
`ConnectionAttempts`	Specifies the number of tries (one per second) to make before exiting. The argument must be an integer. This may be useful in scripts if the connection sometimes fails. The default is 1.
`ConnectTimeout`	Specifies the timeout (in seconds) used when connecting to the SSH server, instead of using the default system TCP timeout. This timeout is applied both to establishing the connection and to performing the initial SSH protocol handshake and key exchange.
`ControlMaster`	Enables the sharing of multiple sessions over a single network connection. When set to yes, ssh(1) will listen for connections on a control socket specified using the ControlPath argument. Additional sessions can connect to this socket using the same ControlPath with ControlMaster set to no (the default). These sessions will try to reuse the master instance's network connection rather than initiating new ones, but will fall back to connecting normally if the control socket does not exist, or is not listening. Setting this to ask will cause ssh(1) to listen for control connections, but require confirmation using ssh-askpass(1). If the ControlPath cannot be opened, ssh(1) will continue without connecting to a master instance. X11 and ssh-agent(1) forwarding is supported over these multiplexed connections, however the display and agent forwarded will be the one belonging to the master connection i.e. it is not possible to forward multiple displays or agents. Two additional options allow for opportunistic multiplexing: try to use a master connection but fall back to creating a new one if one does not already exist. These options are: auto and autoask. The latter requires confirmation like the ask option.
`ControlPath`	Specify the path to the control socket used for connection sharing as described in the ControlMaster section above or the string none to disable connection sharing. Arguments to ControlPath may use the tilde syntax to refer to a user's home directory, the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section. It is recommended that any ControlPath used for opportunistic connection sharing include at least %h, %p, and %r (or alternatively %C) and be placed in a directory that is not writable by other users. This ensures that shared connections are uniquely identified.
`ControlPersist`	When used in conjunction with ControlMaster, specifies that the master connection should remain open in the background (waiting for future client connections) after the initial client connection has been closed. If set to no (the default), then the master connection will not be placed into the background, and will close as soon as the initial client connection is closed. If set to yes or 0, then the master connection will remain in the background indefinitely (until killed or closed via a mechanism such as the "ssh -O exit"). If set to a time in seconds, or a time in any of the formats documented in sshd_config(5), then the backgrounded master connection will automatically terminate after it has remained idle (with no client connections) for the specified time.
`DynamicForward`	Specifies that a TCP port on the local machine be forwarded over the secure channel, and the application protocol is then used to determine where to connect to from the remote machine. The argument must be [bind_address:]port. IPv6 addresses can be specified by enclosing addresses in square brackets. By default, the local port is bound in accordance with the GatewayPorts setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of localhost indicates that the listening port be bound for local use only, while an empty address or `*' indicates that the port should be available from all interfaces. Currently the SOCKS4 and SOCKS5 protocols are supported, and ssh(1) will act as a SOCKS server. Multiple forwardings may be specified, and additional forwardings can be given on the command line. Only the superuser can forward privileged ports.
`EnableEscapeCommandline`	Enables the command line option in the EscapeChar menu for interactive sessions (default `~C'). By default, the command line is disabled.
`EnableSSHKeysign`	Setting this option to yes in the global client configuration file /etc/ssh/ssh_config enables the use of the helper program ssh-keysign(8) during HostbasedAuthentication. The argument must be yes or no (the default). This option should be placed in the non-hostspecific section. See ssh-keysign(8) for more information.
`EscapeChar`	Sets the escape character (default: `~'). The escape character can also be set on the command line. The argument should be a single character, `^' followed by a letter, or none to disable the escape character entirely (making the connection transparent for binary data).
`ExitOnForwardFailure`	Specifies whether ssh(1) should terminate the connection if it cannot set up all requested dynamic, tunnel, local, and remote port forwardings, (e.g. if either end is unable to bind and listen on a specified port). Note that ExitOnForwardFailure does not apply to connections made over port forwardings and will not, for example, cause ssh(1) to exit if TCP connections to the ultimate forwarding destination fail. The argument must be yes or no (the default).
`FingerprintHash`	Specifies the hash algorithm used when displaying key fingerprints. Valid options are: md5 and sha256 (the default).
`ForkAfterAuthentication`	Requests ssh to go to background just before command execution. This is useful if ssh is going to ask for passwords or passphrases, but the user wants it in the background. This implies the StdinNull configuration option being set to "yes". The recommended way to start X11 programs at a remote site is with something like ssh -f host xterm, which is the same as ssh host xterm if the ForkAfterAuthentication configuration option is set to "yes". If the ExitOnForwardFailure configuration option is set to "yes", then a client started with the ForkAfterAuthentication configuration option being set to "yes" will wait for all remote port forwards to be successfully established before placing itself in the background. The argument to this keyword must be yes (same as the -f option) or no (the default).
`ForwardAgent`	Specifies whether the connection to the authentication agent (if any) will be forwarded to the remote machine. The argument may be yes, no (the default), an explicit path to an agent socket or the name of an environment variable (beginning with `$') in which to find the path. Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent's Unix-domain socket) can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however they can perform operations on the keys that enable them to authenticate using the identities loaded into the agent.
`ForwardX11`	Specifies whether X11 connections will be automatically redirected over the secure channel and DISPLAY set. The argument must be yes or no (the default). X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X11 authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring if the ForwardX11Trusted option is also enabled.
`ForwardX11Timeout`	Specify a timeout for untrusted X11 forwarding using the format described in the TIME FORMATS section of sshd_config(5). X11 connections received by ssh(1) after this time will be refused. Setting ForwardX11Timeout to zero will disable the timeout and permit X11 forwarding for the life of the connection. The default is to disable untrusted X11 forwarding after twenty minutes has elapsed.
`ForwardX11Trusted`	If this option is set to yes, remote X11 clients will have full access to the original X11 display. If this option is set to no (the default), remote X11 clients will be considered untrusted and prevented from stealing or tampering with data belonging to trusted X11 clients. Furthermore, the xauth(1) token used for the session will be set to expire after 20 minutes. Remote clients will be refused access after this time. See the X11 SECURITY extension specification for full details on the restrictions imposed on untrusted clients.
`GatewayPorts`	Specifies whether remote hosts are allowed to connect to local forwarded ports. By default, ssh(1) binds local port forwardings to the loopback address. This prevents other remote hosts from connecting to forwarded ports. GatewayPorts can be used to specify that ssh should bind local port forwardings to the wildcard address, thus allowing remote hosts to connect to forwarded ports. The argument must be yes or no (the default).
`GlobalKnownHostsFile`	Specifies one or more files to use for the global host key database, separated by whitespace. The default is /etc/ssh/ssh_known_hosts, /etc/ssh/ssh_known_hosts2.
`GSSAPIAuthentication`	Specifies whether user authentication based on GSSAPI is allowed. The default is no.
`GSSAPIDelegateCredentials`	Forward (delegate) credentials to the server. The default is no.
`HashKnownHosts`	Indicates that ssh(1) should hash host names and addresses when they are added to ~/.ssh/known_hosts. These hashed names may be used normally by ssh(1) and sshd(8), but they do not visually reveal identifying information if the file's contents are disclosed. The default is no. Note that existing names and addresses in known hosts files will not be converted automatically, but may be manually hashed using ssh-keygen(1).
`HostbasedAcceptedAlgorithms`	Specifies the signature algorithms that will be used for hostbased authentication as a comma-separated list of patterns. Alternately if the specified list begins with a `+' character, then the specified signature algorithms will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified signature algorithms (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified signature algorithms will be placed at the head of the default set. The default for this option is: ssh-ed25519-cert-v01@openssh.com, ecdsa-sha2-nistp256-cert-v01@openssh.com, ecdsa-sha2-nistp384-cert-v01@openssh.com, ecdsa-sha2-nistp521-cert-v01@openssh.com, sk-ssh-ed25519-cert-v01@openssh.com, sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, rsa-sha2-512-cert-v01@openssh.com, rsa-sha2-256-cert-v01@openssh.com, ssh-ed25519, ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519@openssh.com, sk-ecdsa-sha2-nistp256@openssh.com, rsa-sha2-512,rsa-sha2-256 The -Q option of ssh(1) may be used to list supported signature algorithms. This was formerly named HostbasedKeyTypes.
`HostbasedAuthentication`	Specifies whether to try rhosts based authentication with public key authentication. The argument must be yes or no (the default).
`HostKeyAlgorithms`	Specifies the host key signature algorithms that the client wants to use in order of preference. Alternately if the specified list begins with a `+' character, then the specified signature algorithms will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified signature algorithms (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified signature algorithms will be placed at the head of the default set. The default for this option is: ssh-ed25519-cert-v01@openssh.com, ecdsa-sha2-nistp256-cert-v01@openssh.com, ecdsa-sha2-nistp384-cert-v01@openssh.com, ecdsa-sha2-nistp521-cert-v01@openssh.com, sk-ssh-ed25519-cert-v01@openssh.com, sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, rsa-sha2-512-cert-v01@openssh.com, rsa-sha2-256-cert-v01@openssh.com, ssh-ed25519, ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ecdsa-sha2-nistp256@openssh.com, sk-ssh-ed25519@openssh.com, rsa-sha2-512,rsa-sha2-256 If hostkeys are known for the destination host then this default is modified to prefer their algorithms. The list of available signature algorithms may also be obtained using "ssh -Q HostKeyAlgorithms".
`HostKeyAlias`	Specifies an alias that should be used instead of the real host name when looking up or saving the host key in the host key database files and when validating host certificates. This option is useful for tunneling SSH connections or for multiple servers running on a single host.
`Hostname`	Specifies the real host name to log into. This can be used to specify nicknames or abbreviations for hosts. Arguments to Hostname accept the tokens described in the TOKENS section. Numeric IP addresses are also permitted (both on the command line and in Hostname specifications). The default is the name given on the command line.
`IdentitiesOnly`	Specifies that ssh(1) should only use the configured authentication identity and certificate files (either the default files, or those explicitly configured in the ssh_config files or passed on the ssh(1) command-line), even if ssh-agent(1) or a PKCS11Provider or SecurityKeyProvider offers more identities. The argument to this keyword must be yes or no (the default). This option is intended for situations where ssh-agent offers many different identities.
`IdentityAgent`	Specifies the UNIX-domain socket used to communicate with the authentication agent. This option overrides the SSH_AUTH_SOCK environment variable and can be used to select a specific agent. Setting the socket name to none disables the use of an authentication agent. If the string "SSH_AUTH_SOCK" is specified, the location of the socket will be read from the SSH_AUTH_SOCK environment variable. Otherwise if the specified value begins with a `$' character, then it will be treated as an environment variable containing the location of the socket. Arguments to IdentityAgent may use the tilde syntax to refer to a user's home directory, the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section.
`IdentityFile`	Specifies a file from which the user's DSA, ECDSA, authenticator-hosted ECDSA, Ed25519, authenticator-hosted Ed25519 or RSA authentication identity is read. You can also specify a public key file to use the corresponding private key that is loaded in ssh-agent(1) when the private key file is not present locally. The default is ~/.ssh/id_rsa, ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519, ~/.ssh/id_ed25519_sk and ~/.ssh/id_dsa. Additionally, any identities represented by the authentication agent will be used for authentication unless IdentitiesOnly is set. If no certificates have been explicitly specified by CertificateFile, ssh(1) will try to load certificate information from the filename obtained by appending -cert.pub to the path of a specified IdentityFile. Arguments to IdentityFile may use the tilde syntax to refer to a user's home directory or the tokens described in the TOKENS section. It is possible to have multiple identity files specified in configuration files; all these identities will be tried in sequence. Multiple IdentityFile directives will add to the list of identities tried (this behaviour differs from that of other configuration directives). IdentityFile may be used in conjunction with IdentitiesOnly to select which identities in an agent are offered during authentication. IdentityFile may also be used in conjunction with CertificateFile in order to provide any certificate also needed for authentication with the identity.
`IgnoreUnknown`	Specifies a pattern-list of unknown options to be ignored if they are encountered in configuration parsing. This may be used to suppress errors if ssh_config contains options that are unrecognised by ssh(1). It is recommended that IgnoreUnknown be listed early in the configuration file as it will not be applied to unknown options that appear before it.
`Include`	Include the specified configuration file(s). Multiple pathnames may be specified and each pathname may contain glob(7) wildcards and, for user configurations, shell-like `~' references to user home directories. Wildcards will be expanded and processed in lexical order. Files without absolute paths are assumed to be in ~/.ssh if included in a user configuration file or /etc/ssh if included from the system configuration file. Include directive may appear inside a Match or Host block to perform conditional inclusion.
`IPQoS`	Specifies the IPv4 type-of-service or DSCP class for connections. Accepted values are af11, af12, af13, af21, af22, af23,	af31, af32, af33, af41, af42, af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef, le, lowdelay, throughput, reliability, a numeric value, or none to use the operating system default. This option may take one or two arguments, separated by whitespace. If one argument is specified, it is used as the packet class unconditionally. If two values are specified, the first is automatically selected for interactive sessions and the second for non-interactive sessions. The default is af21 (Low-Latency Data) for interactive sessions and cs1 (Lower Effort) for non-interactive sessions.
`KbdInteractiveAuthentication`	Specifies whether to use keyboard-interactive authentication. The argument to this keyword must be yes (the default) or no. ChallengeResponseAuthentication is a deprecated alias for this.
`KbdInteractiveDevices`	Specifies the list of methods to use in keyboard-interactive authentication. Multiple method names must be comma-separated. The default is to use the server specified list. The methods available vary depending on what the server supports. For an OpenSSH server, it may be zero or more of: bsdauth and pam.
`KexAlgorithms`	Specifies the available KEX (Key Exchange) algorithms. Multiple algorithms must be comma-separated. If the specified list begins with a `+' character, then the specified algorithms will be appended to the default set instead of replacing them. If the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing them. If the specified list begins with a `^' character, then the specified algorithms will be placed at the head of the default set. The default is: sntrup761x25519-sha512@openssh.com, curve25519-sha256,curve25519-sha256@libssh.org, ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521, diffie-hellman-group-exchange-sha256, diffie-hellman-group16-sha512, diffie-hellman-group18-sha512, diffie-hellman-group14-sha256 The list of available key exchange algorithms may also be obtained using "ssh -Q kex".
`KnownHostsCommand`	Specifies a command to use to obtain a list of host keys, in addition to those listed in UserKnownHostsFile and GlobalKnownHostsFile. This command is executed after the files have been read. It may write host key lines to standard output in identical format to the usual files (described in the VERIFYING HOST KEYS section in ssh(1)). Arguments to KnownHostsCommand accept the tokens described in the TOKENS section. The command may be invoked multiple times per connection: once when preparing the preference list of host key algorithms to use, again to obtain the host key for the requested host name and, if CheckHostIP is enabled, one more time to obtain the host key matching the server's address. If the command exits abnormally or returns a non-zero exit status then the connection is terminated.
`LocalCommand`	Specifies a command to execute on the local machine after successfully connecting to the server. The command string extends to the end of the line, and is executed with the user's shell. Arguments to LocalCommand accept the tokens described in the TOKENS section. The command is run synchronously and does not have access to the session of the ssh(1) that spawned it. It should not be used for interactive commands. This directive is ignored unless PermitLocalCommand has been enabled.
`LocalForward`	Specifies that a TCP port on the local machine be forwarded over the secure channel to the specified host and port from the remote machine. The first argument specifies the listener and may be [bind_address:]port or a Unix domain socket path. The second argument is the destination and may be host:hostport or a Unix domain socket path if the remote host supports it. IPv6 addresses can be specified by enclosing addresses in square brackets. Multiple forwardings may be specified, and additional forwardings can be given on the command line. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the GatewayPorts setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of localhost indicates that the listening port be bound for local use only, while an empty address or `*' indicates that the port should be available from all interfaces. Unix domain socket paths may use the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section.
`LogLevel QUIET\| FATAL\| ERROR\| INFO\| VERBOSE\| DEBUG\| DEBUG1\| DEBUG2\| and DEBUG3`	Default:" `INFO. DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 specify higher levels of verbose output.`
`LogVerbose`	Overrides to LogLevel consisting of a pattern lists that matches the source file, function and line number to force detailed logging for. For example, an override pattern of: `kex.c::1000,:kex_exchange_identification():,packet.c:` would enable detailed logging for line 1000 of `kex.c`, in the `kex_exchange_identification() function , and all code in packet.c . for debugging ssh no overrides are enabled by default.`
`MACs`	Specifies the MAC (message authentication code) algorithms in order of preference. The MAC algorithm is used for data	integrity protection. Multiple algorithms must be comma-separated. Entries beginiing with a `+' , are appended . Entries beginning with a `-' , (including wildcards) are removed from the set . If the list begins with a `^' , specified algorithms are placed at the head of the set. Algorithms containing `-etm"` calculate the MAC after encryption (encrypt-then-mac), are considered safer and their use is recommended. The default is: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com, hmac-sha1-etm@openssh.com, umac-64@openssh.com,umac-128@openssh.com, hmac-sha2-256,hmac-sha2-512,hmac-sha1 The list of available algorithms is displayed with `"ssh -Q mac".`
`NoHostAuthenticationForLocalhost yes\|no`	Disable host authentication for localhost (loopback addresses).
`NumberOfPasswordPrompts n`	number of password prompts permnitted. default 3.
`PasswordAuthentication yes\|no`	use password authentication.
`PermitLocalCommand yes\|no`	Allow local command execution via `LocalCommand or using the !command escape sequence in ssh.`
`PermitRemoteOpen any\|none\| [\| host]:i[\|port\| IPv4_addr:port\| [IPv6_addr]:port`	Destinations to which remote TCP port forwarding is permitted when RemoteForward is used as a SOCKS proxy. Multiple forwards may be specified by separated by whitespace. any removes all restrictions and permit any forwarding requests. none prohibits all forwarding requests. The wildcard `*' can be used for host or port to allow all hosts or ports . No other pattern matching or address lookups are performed on supplied names.
`PKCS11Provider [path\|nonei]`	Which PKCS#11 provider to use or `none` no provider should be used (the default). `path` to the PKCS#11 shared library ssh should use to communicate with a PKCS#11 token providing keys for user authentication. Setting PKCS11Provider will disable UseKeychain.
`Port p`	port number to connect on . The default is 22.
`PreferredAuthentications`	The order in which the client should try authentication methods allowing the client to prefer one method (e.g. keyboard-interactive) over another method (e.g. password). The default is: gssapi-with-mic,hostbased,publickey, keyboard-interactive,password
`ProxyCommand [none \| command string`	the command string to use to connect to the server which extends to the end of the line, and is executed using the user's shell `exec' directive. Arguments are described in TOKENS . read from standard input and write to standard output. It should eventually connect an sshd(8) server running on some machine, or execute `sshd -i somewhere`. Host key management will be done using the Hostname of the host being connected (defaulting to the name typed by the user). Setting the command to `none` disables this option . `CheckHostIP` is not available for connects with a proxy command. This directive is useful in conjunction with nc and its proxy support. For example, the following directive would connect via an HTTP proxy at 192.0.2.0: ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p
`ProxyJump none\|jump1 [, jump2i … ]`	jump proxies as either [user@]host[:port] or an ssh URI. Multiple proxies will be visited sequentially. Setting this option will cause ssh(1) to connect to the target host by first making a ssh(1) connection to the specified ProxyJump host and then establishing a TCP forwarding to the ultimate target from there. Setting to `none` disables this option . Competes with `ProxyCommand` whichever is specified first takes presentence. The configuration for the destination host (either supplied via the command-line or the configuration file) is not generally applied to jump hosts. `~/.ssh/config` should be used if specific configuration is required for jump hosts.
`ProxyUseFdpass [no\|FileDesc]`	`ProxyCommand` will pass a connected file descriptor to ssh(1) instead of continuing to execute and pass data. The default is no.
`PubkeyAcceptedAlgorithms aglo1,algo2,…`	signature algorithms that will be used for public key authentication patterns. If the list begins with a `+' character the algorithms will be appended to the default If the list begins with a `-' character the specified algorithms (including wildcards) will be removed from the default set If the list begins with a `^' character the specified algorithms will be placed at the head of the default set. The default for this option is: ssh-ed25519-cert-v01@openssh.com, ecdsa-sha2-nistp256-cert-v01@openssh.com, ecdsa-sha2-nistp384-cert-v01@openssh.com, ecdsa-sha2-nistp521-cert-v01@openssh.com, sk-ssh-ed25519-cert-v01@openssh.com, sk-ecdsa-sha2-nistp256-cert-v01@openssh.com, rsa-sha2-512-cert-v01@openssh.com, rsa-sha2-256-cert-v01@openssh.com, ssh-ed25519, ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519@openssh.com, sk-ecdsa-sha2-nistp256@openssh.com, rsa-sha2-512,rsa-sha2-256 The list of available signature algorithms is displayed using "ssh -Q PubkeyAcceptedAlgorithms".
`PubkeyAuthentication [yes\|no\|unbound\|host-blound]`	try public key authentication. The final two options enable public key authentication while respectively disabling or enabling the OpenSSH host-bound authentication protocol extension required for restricted ssh-agent(1) forwarding.
`RekeyLimit [none\|n [seconds]`	Maximum amount of data that may be transmitted or received before the session key is renegotiated, followed by a maximum amount of time that may pass before the session key is renegotiated. `n`is in bytes and may be suffixed with `K', `M', or `G' to indicate Kilobytes, Megabytes, or Gigabytes. The default is between `1G and 4G`, depending on the cipher. The `seconds` uses units documented in the TIME FORMATS section of sshd_config(5). default value is `none`, which means that rekeying is performed after the cipher's default amount of data has been sent or received and no time based rekeying is done.
`RemoteCommand command`	execute on the remote machine after successfully connecting .
`RemoteForward`	Specifies that a TCP port on the remote machine be forwarded over the secure channel. The remote port may either be forwarded to a specified host and port from the local machine, or may act as a SOCKS 4/5 proxy that allows a remote client to connect to arbitrary destinations from the local machine. The first argument is the listening specification and may be [bind_address:]port or, if the remote host supports it, a Unix domain socket path. If forwarding to a specific destination then the second argument must be host:hostport or a Unix domain socket path, otherwise if no destination argument is specified then the remote forwarding will be established as a SOCKS proxy. When acting as a SOCKS proxy, the destination of the connection can be restricted by PermitRemoteOpen. IPv6 addresses can be specified by enclosing addresses in square brackets. Multiple forwardings may be specified, and additional forwardings can be given on the command line. Privileged ports can be forwarded only when logging in as root on the remote machine. Unix domain socket paths may use the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section. If the port argument is 0, the listen port will be dynamically allocated on the server and reported to the client at run time. If the bind_address is not specified, the default is to only bind to loopback addresses. If the bind_address is `*' or an empty string, then the forwarding is requested to listen on all interfaces. Specifying a remote bind_address will only succeed if the server's GatewayPorts option is enabled (see sshd_config(5)).
`RequestTTY`	Specifies whether to request a pseudo-tty for the session. The argument may be one of: no (never request a TTY), yes (always request a TTY when standard input is a TTY), force (always request a TTY) or auto (request a TTY when opening a login session). This option mirrors the -t and -T flags for ssh(1).
`RequiredRSASize`	Specifies the minimum RSA key size (in bits) that ssh(1) will accept. User authentication keys smaller than this limit will be ignored. Servers that present host keys smaller than this limit will cause the connection to be terminated. The default is 1024 bits. Note that this limit may only be raised from the default.
`RevokedHostKeys`	Specifies revoked host public keys. Keys listed in this file will be refused for host authentication. Note that if this file does not exist or is not readable, then host authentication will be refused for all hosts. Keys may be specified as a text file, listing one public key per line, or as an OpenSSH Key Revocation List (KRL) as generated by ssh-keygen(1). For more information on KRLs, see the KEY REVOCATION LISTS section in ssh-keygen(1). Arguments to RevokedHostKeys may use the tilde syntax to refer to a user's home directory, the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section.
`SecurityKeyProvider`	Specifies a path to a library that will be used when loading any FIDO authenticator-hosted keys, overriding the default of using the built-in USB HID support. If the specified value begins with a `$' character, then it will be treated as an environment variable containing the path to the library.
`SendEnv`	Specifies what variables from the local environ(7) should be sent to the server. The server must also support it, and the server must be configured to accept these environment variables. Note that the TERM environment variable is always sent whenever a pseudo-terminal is requested as it is required by the protocol. Refer to AcceptEnv in sshd_config(5) for how to configure the server. Variables are specified by name, which may contain wildcard characters. Multiple environment variables may be separated by whitespace or spread across multiple SendEnv directives. See PATTERNS for more information on patterns. It is possible to clear previously set SendEnv variable names by prefixing patterns with -. The default is not to send any environment variables.
`ServerAliveCountMax`	Sets the number of server alive messages (see below) which may be sent without ssh(1) receiving any messages back from the server. If this threshold is reached while server alive messages are being sent, ssh will disconnect from the server, terminating the session. It is important to note that the use of server alive messages is very different from TCPKeepAlive (below). The server alive messages are sent through the encrypted channel and therefore will not be spoofable. The TCP keepalive option enabled by TCPKeepAlive is spoofable. The server alive mechanism is valuable when the client or server depend on knowing when a connection has become unresponsive. The default value is 3. If, for example, ServerAliveInterval (see below) is set to 15 and ServerAliveCountMax is left at the default, if the server becomes unresponsive, ssh will disconnect after approximately 45 seconds.
`ServerAliveInterval`	Sets a timeout interval in seconds after which if no data has been received from the server, ssh(1) will send a message through the encrypted channel to request a response from the server. The default is 0, indicating that these messages will not be sent to the server.
`SessionType`	May be used to either request invocation of a subsystem on the remote system, or to prevent the execution of a remote command at all. The latter is useful for just forwarding ports. The argument to this keyword must be none (same as the -N option), subsystem (same as the -s option) or default (shell or command execution).
`SetEnv`	Directly specify one or more environment variables and their contents to be sent to the server. Similarly to SendEnv, wiht the exception of the TERM variable, the server must be prepared to accept the environment variable.
`StdinNull`	Redirects stdin from /dev/null (actually, prevents reading from stdin). Either this or the equivalent -n option must be used when ssh is run in the background. The argument to this keyword must be yes (same as the -n option) or no (the default).
`StreamLocalBindMask`	Sets the octal file creation mode mask (umask) used when creating a Unix-domain socket file for local or remote port forwarding. This option is only used for port forwarding to a Unix-domain socket file. The default value is 0177, which creates a Unix-domain socket file that is readable and writable only by the owner. Note that not all operating systems honor the file mode on Unix-domain socket files.
`StreamLocalBindUnlink`	Specifies whether to remove an existing Unix-domain socket file for local or remote port forwarding before creating a new one. If the socket file already exists and StreamLocalBindUnlink is not enabled, ssh will be unable to forward the port to the Unix-domain socket file. This option is only used for port forwarding to a Unix-domain socket file. The argument must be yes or no (the default).
`StrictHostKeyChecking`	If this flag is set to yes, ssh(1) will never automatically add host keys to the ~/.ssh/known_hosts file, and refuses to connect to hosts whose host key has changed. This provides maximum protection against man-in-the-middle (MITM) attacks, though it can be annoying when the /etc/ssh/ssh_known_hosts file is poorly maintained or when connections to new hosts are frequently made. This option forces the user to manually add all new hosts. If this flag is set to accept-new then ssh will automatically add new host keys to the user's known_hosts file, but will not permit connections to hosts with changed host keys. If this flag is set to no or off, ssh will automatically add new host keys to the user known hosts files and allow connections to hosts with changed hostkeys to proceed, subject to some restrictions. If this flag is set to ask (the default), new host keys will be added to the user known host files only after the user has confirmed that is what they really want to do, and ssh will refuse to connect to hosts whose host key has changed. The host keys of known hosts will be verified automatically in all cases.
`SyslogFacility`	Gives the facility code that is used when logging messages from ssh(1). The possible values are: DAEMON, USER, AUTH, LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. The default is USER.
`TCPKeepAlive`	Specifies whether the system should send TCP keepalive messages to the other side. If they are sent, death of the connection or crash of one of the machines will be properly noticed. However, this means that connections will die if the route is down temporarily, and some people find it annoying. The default is yes (to send TCP keepalive messages), and the client will notice if the network goes down or the remote host dies. This is important in scripts, and many users want it too. To disable TCP keepalive messages, the value should be set to no. See also ServerAliveInterval for protocol-level keepalives.
`Tag`	Specify a configuration tag name that may be later used by a Match directive to select a block of configuration. >
`Tunnel`	Request tun(4) device forwarding between the client and the server. The argument must be yes, point-to-point (layer 3),	ethernet (layer 2), or no (the default). Specifying yes requests the default tunnel mode, which is point-to-point.
`TunnelDevice`	Specifies the tun(4) devices to open on the client (local_tun) and the server (remote_tun). The argument must be local_tun[:remote_tun]. The devices may be specified by numerical ID or the keyword any, which uses the next available tunnel device. If remote_tun is not specified, it defaults to any. The default is any:any.
`UpdateHostKeys`	Specifies whether ssh(1) should accept notifications of additional hostkeys from the server sent after authentication has completed and add them to UserKnownHostsFile. The argument must be yes, no or ask. This option allows learning alternate hostkeys for a server and supports graceful key rotation by allowing a server to send replacement public keys before old ones are removed. Additional hostkeys are only accepted if the key used to authenticate the host was already trusted or explicitly accepted by the user, the host was authenticated via UserKnownHostsFile (i.e. not GlobalKnownHostsFile) and the host was authenticated using a plain key and not a certificate. UpdateHostKeys is enabled by default if the user has not overridden the default UserKnownHostsFile setting and has not enabled VerifyHostKeyDNS, otherwise UpdateHostKeys will be set to no. If UpdateHostKeys is set to ask, then the user is asked to confirm the modifications to the known_hosts file. Confirmation is currently incompatible with ControlPersist, and will be disabled if it is enabled. Presently, only sshd(8) from OpenSSH 6.8 and greater support the "hostkeys@openssh.com" protocol extension used to inform the client of all the server's hostkeys.
`UseKeychain`	On macOS, specifies whether the system should search for passphrases in the user's keychain when attempting to use a particular key. When the passphrase is provided by the user, this option also specifies whether the passphrase should be stored into the keychain once it has been verified to be correct. The argument must be "yes" or "no". The default is "no". Incompatible with PKCS11Provider.
`User`	Specifies the user to log in as. This can be useful when a different user name is used on different machines. This saves the trouble of having to remember to give the user name on the command line.
`UserKnownHostsFile`	Specifies one or more files to use for the user host key database, separated by whitespace. Each filename may use tilde notation to refer to the user's home directory, the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES section. A value of none causes ssh(1) to ignore any user-specific known hosts files. The default is ~/.ssh/known_hosts, ~/.ssh/known_hosts2.
`VerifyHostKeyDNS`	Specifies whether to verify the remote key using DNS and SSHFP resource records. If this option is set to yes, the client will implicitly trust keys that match a secure fingerprint from DNS. Insecure fingerprints will be handled as if this option was set to ask. If this option is set to ask, information on fingerprint match will be displayed, but the user will still need to confirm new host keys according to the StrictHostKeyChecking option. The default is no. See also VERIFYING HOST KEYS in ssh(1).
`VisualHostKey`	If this flag is set to yes, an ASCII art representation of the remote host key fingerprint is printed in addition to the fingerprint string at login and for unknown host keys. If this flag is set to no (the default), no fingerprint strings are printed at login and only the fingerprint string will be printed for unknown host keys.
`XAuthLocation`	Specifies the full pathname of the xauth(1) program. The default is /usr/X11R6/bin/xauth.

PATTERNS

A pattern consists of zero or more non-whitespace characters, `*' (a wildcard that matches zero or more characters), or `?' (a
`wildcard that matches exactly one character). For example, to specify a set of declarations for any host in the ".co.uk" set of`
`domains, the following pattern could be used:`	Host *.co.uk
`The following pattern would match any host in the 192.168.0.[0-9] network range:`	Host 192.168.0.?
`A pattern-list is a comma-separated list of patterns. Patterns within pattern-lists may be negated by preceding them with an`
exclamation mark (`!'). For example, to allow a key to be used from anywhere within an organization except from the "dialup" pool,
`the following entry (in authorized_keys) could be used:`	from="!.dialup.example.com,.example.com"
`Note that a negated match will never produce a positive result by itself. For example, attempting to match "host3" against the`
`following pattern-list will fail:`	from="!host1,!host2"
`The solution here is to include a term that will yield a positive match, such as a wildcard: from="!host1,!host2,*"`

TOKENS

Arguments to some keywords can make use of tokens, which are expanded at runtime: %% A literal `%'. %C Hash of %l%h%p%r. %d Local user's home directory. %f The fingerprint of the server's host key. %H The known_hosts hostname or address that is being searched for. %h The remote hostname. %I A string describing the reason for a KnownHostsCommand execution: either ADDRESS when looking up a host by address (only when CheckHostIP is enabled), HOSTNAME when searching by hostname, or ORDER when preparing the host key algorithm preference list to use for the destination host. %i The local user ID. %K The base64 encoded host key. %k The host key alias if specified, otherwise the original remote hostname given on the command line. %L The local hostname. %l The local hostname, including the domain name. %n The original remote hostname, as given on the command line. %p The remote port. %r The remote username. %T The local tun(4) or tap(4) network interface assigned if tunnel forwarding was requested, or "NONE" otherwise. %t The type of the server host key, e.g. ssh-ed25519. %u The local username.
`CertificateFile, ControlPath, IdentityAgent, IdentityFile, KnownHostsCommand, LocalForward, Match exec, RemoteCommand, RemoteForward,`
`RevokedHostKeys, and UserKnownHostsFile accept the tokens %%, %C, %d, %h, %i, %k, %L, %l, %n, %p, %r, and %u.`
`KnownHostsCommand additionally accepts the tokens %f, %H, %I, %K and %t.`
`Hostname accepts the tokens %% and %h.`
`LocalCommand accepts all tokens`
`ProxyCommand and ProxyJump accept the tokens %%, %h, %n, %p, and %r`

ENVIRONMENT VARIABLES

Arguments to some keywords can be expanded at runtime from environment variables on the client by enclosing them in ${}, for example ${HOME}/.ssh would refer to the user's .ssh directory. If a specified environment variable does not exist then an error will be returned and the setting for that keyword will be ignored. The keywords CertificateFile, ControlPath, IdentityAgent, IdentityFile, KnownHostsCommand, and UserKnownHostsFile support environment variables. The keywords LocalForward and RemoteForward support environment variables only for Unix domain socket paths.

FILES

per-user configuration file. The format of this file is described above. This file is used by the SSH client. Because of the potential for abuse, this file must have strict permissions: read/write for the user, and not writable by others. Last login: Fri Oct 20 11:32:23 on ttys002

SSH_CONFIG(5)                                               File Formats Manual                                              SSH_CONFIG(5)

NAME
sh_config - OpenSSH client configuration file

ssh(1) obtains configuration data from the following sources in the following order:

           1.   command-line options
           2.   user's configuration file (~/.ssh/config)
           3.   system-wide configuration file (/etc/ssh/ssh_config)

Unless noted otherwise, for each parameter, the first obtained value will be used.  The configuration files contain sections
separated by Host specifications, and that section is only applied for hosts that match one of the patterns given in the
specification.  The matched host name is usually the one given on the command line (see the CanonicalizeHostname option for
exceptions).

Since the first obtained value for each parameter is used, more host-specific declarations should be given near the beginning of the
file, and general defaults at the end.

The file contains keyword-argument pairs, one per line.  Lines starting with `#' and empty lines are interpreted as comments.
Arguments may optionally be enclosed in double quotes (") in order to represent arguments containing spaces.  Configuration options
may be separated by whitespace or optional whitespace and exactly one `='; the latter format is useful to avoid the need to quote
whitespace when specifying configuration options using the ssh, scp, and sftp -o option.

The possible keywords and their meanings are as follows (note that keywords are case-insensitive and arguments are case-sensitive):

Host    Restricts the following declarations (up to the next Host or Match keyword) to be only for those hosts that match one of the
             patterns given after the keyword.  If more than one pattern is provided, they should be separated by whitespace.  A single
             `*' as a pattern can be used to provide global defaults for all hosts.  The host is usually the hostname argument given on
             the command line (see the CanonicalizeHostname keyword for exceptions).

             A pattern entry may be negated by prefixing it with an exclamation mark (`!').  If a negated entry is matched, then the Host
             entry is ignored, regardless of whether any other patterns on the line match.  Negated matches are therefore useful to
             provide exceptions for wildcard matches.

             See PATTERNS for more information on patterns.

Match   Restricts the following declarations (up to the next Host or Match keyword) to be used only when the conditions following the
             Match keyword are satisfied.  Match conditions are specified using one or more criteria or the single token all which always
             matches.  The available criteria keywords are: canonical, final, exec, localnetwork, host, originalhost, Tag, user, and
             localuser.  The all criteria must appear alone or immediately after canonical or final.  Other criteria may be combined
             arbitrarily.  All criteria but all, canonical, and final require an argument.  Criteria may be negated by prepending an
             exclamation mark (`!').

             The canonical keyword matches only when the configuration file is being re-parsed after hostname canonicalization (see the
             CanonicalizeHostname option).  This may be useful to specify conditions that work with canonical host names only.

             The final keyword requests that the configuration be re-parsed (regardless of whether CanonicalizeHostname is enabled), and
             matches only during this final pass.  If CanonicalizeHostname is enabled, then canonical and final match during the same
             pass.

             The exec keyword executes the specified command under the user's shell.  If the command returns a zero exit status then the
             condition is considered true.  Commands containing whitespace characters must be quoted.  Arguments to exec accept the tokens
             described in the TOKENS section.

             The localnetwork keyword matches the addresses of active local network interfaces against the supplied list of networks in
             CIDR format.  This may be convenient for varying the effective configuration on devices that roam between networks.  Note
             that network address is not a trustworthy criteria in many situations (e.g. when the network is automatically configured
             using DHCP) and so caution should be applied if using it to control security-sensitive configuration.

             The other keywords' criteria must be single entries or comma-separated lists and may use the wildcard and negation operators
             described in the PATTERNS section.  The criteria for the host keyword are matched against the target hostname, after any
             substitution by the Hostname or CanonicalizeHostname options.  The originalhost keyword matches against the hostname as it
             was specified on the command-line.  The tagged keyword matches a tag name specified by a prior Tag directive or on the ssh(1)
             command-line using the -P flag.  The user keyword matches against the target username on the remote host.  The localuser
             keyword matches against the name of the local user running ssh(1) (this keyword may be useful in system-wide ssh_config
             files).

AddKeysToAgent
             Specifies whether keys should be automatically added to a running ssh-agent(1).  If this option is set to yes and a key is
             loaded from a file, the key and its passphrase are added to the agent with the default lifetime, as if by ssh-add(1).  If
             this option is set to ask, ssh(1) will require confirmation using the SSH_ASKPASS program before adding a key (see ssh-add(1)
             for details).  If this option is set to confirm, each use of the key must be confirmed, as if the -c option was specified to
             ssh-add(1).  If this option is set to no, no keys are added to the agent.  Alternately, this option may be specified as a
             time interval using the format described in the TIME FORMATS section of sshd_config(5) to specify the key's lifetime in
             ssh-agent(1), after which it will automatically be removed.  The argument must be no (the default), yes, confirm (optionally
             followed by a time interval), ask or a time interval.

AddressFamily
             Specifies which address family to use when connecting.  Valid arguments are any (the default), inet (use IPv4 only), or inet6
             (use IPv6 only).

BatchMode
             If set to yes, user interaction such as password prompts and host key confirmation requests will be disabled.  This option is
             useful in scripts and other batch jobs where no user is present to interact with ssh(1).  The argument must be yes or no (the
             default).

BindAddress
             Use the specified address on the local machine as the source address of the connection.  Only useful on systems with more
             than one address.

BindInterface
             Use the address of the specified interface on the local machine as the source address of the connection.

CanonicalDomains
             When CanonicalizeHostname is enabled, this option specifies the list of domain suffixes in which to search for the specified
             destination host.

CanonicalizeFallbackLocal
             Specifies whether to fail with an error when hostname canonicalization fails.  The default, yes, will attempt to look up the
             unqualified hostname using the system resolver's search rules.  A value of no will cause ssh(1) to fail instantly if
             CanonicalizeHostname is enabled and the target hostname cannot be found in any of the domains specified by CanonicalDomains.

CanonicalizeHostname
             Controls whether explicit hostname canonicalization is performed.  The default, no, is not to perform any name rewriting and
             let the system resolver handle all hostname lookups.  If set to yes then, for connections that do not use a ProxyCommand or
             ProxyJump, ssh(1) will attempt to canonicalize the hostname specified on the command line using the CanonicalDomains suffixes
             and CanonicalizePermittedCNAMEs rules.  If CanonicalizeHostname is set to always, then canonicalization is applied to proxied
             connections too.

             If this option is enabled, then the configuration files are processed again using the new target name to pick up any new
             configuration in matching Host and Match stanzas.  A value of none disables the use of a ProxyJump host.

CanonicalizeMaxDots
             Specifies the maximum number of dot characters in a hostname before canonicalization is disabled.  The default, 1, allows a
             single dot (i.e. hostname.subdomain).

CanonicalizePermittedCNAMEs
             Specifies rules to determine whether CNAMEs should be followed when canonicalizing hostnames.  The rules consist of one or
             more arguments of source_domain_list:target_domain_list, where source_domain_list is a pattern-list of domains that may
             follow CNAMEs in canonicalization, and target_domain_list is a pattern-list of domains that they may resolve to.

             For example, "*.a.example.com:*.b.example.com,*.c.example.com" will allow hostnames matching "*.a.example.com" to be
             canonicalized to names in the "*.b.example.com" or "*.c.example.com" domains.

             A single argument of "none" causes no CNAMEs to be considered for canonicalization.  This is the default behaviour.

CASignatureAlgorithms
             Specifies which algorithms are allowed for signing of certificates by certificate authorities (CAs).  The default is:

                   ssh-ed25519,ecdsa-sha2-nistp256,
                   ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                   sk-ssh-ed25519@openssh.com,
                   sk-ecdsa-sha2-nistp256@openssh.com,
                   rsa-sha2-512,rsa-sha2-256

             If the specified list begins with a `+' character, then the specified algorithms will be appended to the default set instead
             of replacing them.  If the specified list begins with a `-' character, then the specified algorithms (including wildcards)
             will be removed from the default set instead of replacing them.

             ssh(1) will not accept host certificates signed using algorithms other than those specified.

CertificateFile
             Specifies a file from which the user's certificate is read.  A corresponding private key must be provided separately in order
             to use this certificate either from an IdentityFile directive or -i flag to ssh(1), via ssh-agent(1), or via a PKCS11Provider
             or SecurityKeyProvider.

             Arguments to CertificateFile may use the tilde syntax to refer to a user's home directory, the tokens described in the TOKENS
             section and environment variables as described in the ENVIRONMENT VARIABLES section.

             It is possible to have multiple certificate files specified in configuration files; these certificates will be tried in
             sequence.  Multiple CertificateFile directives will add to the list of certificates used for authentication.

CheckHostIP
             If set to yes, ssh(1) will additionally check the host IP address in the known_hosts file.  This allows it to detect if a
             host key changed due to DNS spoofing and will add addresses of destination hosts to ~/.ssh/known_hosts in the process,
             regardless of the setting of StrictHostKeyChecking.  If the option is set to no (the default), the check will not be
             executed.

Ciphers
             Specifies the ciphers allowed and their order of preference.  Multiple ciphers must be comma-separated.  If the specified
             list begins with a `+' character, then the specified ciphers will be appended to the default set instead of replacing them.
             If the specified list begins with a `-' character, then the specified ciphers (including wildcards) will be removed from the
             default set instead of replacing them.  If the specified list begins with a `^' character, then the specified ciphers will be
             placed at the head of the default set.

             The supported ciphers are:
                   3des-cbc
                   aes128-cbc
                   aes192-cbc
                   aes256-cbc
                   aes128-ctr
                   aes192-ctr
                   aes256-ctr
                   aes128-gcm@openssh.com
                   aes256-gcm@openssh.com
                   chacha20-poly1305@openssh.com

             The default is:

                   chacha20-poly1305@openssh.com,
                   aes128-ctr,aes192-ctr,aes256-ctr,
                   aes128-gcm@openssh.com,aes256-gcm@openssh.com

             The list of available ciphers may also be obtained using "ssh -Q cipher".

ClearAllForwardings
             Specifies that all local, remote, and dynamic port forwardings specified in the configuration files or on the command line be
             cleared.  This option is primarily useful when used from the ssh(1) command line to clear port forwardings set in
             configuration files, and is automatically set by scp(1) and sftp(1).  The argument must be yes or no (the default).

Compression
             Specifies whether to use compression.  The argument must be yes or no (the default).

ConnectionAttempts
             Specifies the number of tries (one per second) to make before exiting.  The argument must be an integer.  This may be useful
             in scripts if the connection sometimes fails.  The default is 1.

ConnectTimeout
             Specifies the timeout (in seconds) used when connecting to the SSH server, instead of using the default system TCP timeout.
             This timeout is applied both to establishing the connection and to performing the initial SSH protocol handshake and key
             exchange.

ControlMaster
             Enables the sharing of multiple sessions over a single network connection.  When set to yes, ssh(1) will listen for
             connections on a control socket specified using the ControlPath argument.  Additional sessions can connect to this socket
             using the same ControlPath with ControlMaster set to no (the default).  These sessions will try to reuse the master
             instance's network connection rather than initiating new ones, but will fall back to connecting normally if the control
             socket does not exist, or is not listening.

             Setting this to ask will cause ssh(1) to listen for control connections, but require confirmation using ssh-askpass(1).  If
             the ControlPath cannot be opened, ssh(1) will continue without connecting to a master instance.

             X11 and ssh-agent(1) forwarding is supported over these multiplexed connections, however the display and agent forwarded will
             be the one belonging to the master connection i.e. it is not possible to forward multiple displays or agents.

             Two additional options allow for opportunistic multiplexing: try to use a master connection but fall back to creating a new
             one if one does not already exist.  These options are: auto and autoask.  The latter requires confirmation like the ask
             option.

ControlPath
             Specify the path to the control socket used for connection sharing as described in the ControlMaster section above or the
             string none to disable connection sharing.  Arguments to ControlPath may use the tilde syntax to refer to a user's home
             directory, the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES
             section.  It is recommended that any ControlPath used for opportunistic connection sharing include at least %h, %p, and %r
             (or alternatively %C) and be placed in a directory that is not writable by other users.  This ensures that shared connections
             are uniquely identified.

ControlPersist
             When used in conjunction with ControlMaster, specifies that the master connection should remain open in the background
             (waiting for future client connections) after the initial client connection has been closed.  If set to no (the default),
             then the master connection will not be placed into the background, and will close as soon as the initial client connection is
             closed.  If set to yes or 0, then the master connection will remain in the background indefinitely (until killed or closed
             via a mechanism such as the "ssh -O exit").  If set to a time in seconds, or a time in any of the formats documented in
             sshd_config(5), then the backgrounded master connection will automatically terminate after it has remained idle (with no
             client connections) for the specified time.

DynamicForward
             Specifies that a TCP port on the local machine be forwarded over the secure channel, and the application protocol is then
             used to determine where to connect to from the remote machine.

             The argument must be [bind_address:]port.  IPv6 addresses can be specified by enclosing addresses in square brackets.  By
             default, the local port is bound in accordance with the GatewayPorts setting.  However, an explicit bind_address may be used
             to bind the connection to a specific address.  The bind_address of localhost indicates that the listening port be bound for
             local use only, while an empty address or `*' indicates that the port should be available from all interfaces.

             Currently the SOCKS4 and SOCKS5 protocols are supported, and ssh(1) will act as a SOCKS server.  Multiple forwardings may be
             specified, and additional forwardings can be given on the command line.  Only the superuser can forward privileged ports.

EnableEscapeCommandline
             Enables the command line option in the EscapeChar menu for interactive sessions (default `~C').  By default, the command line
             is disabled.

EnableSSHKeysign
             Setting this option to yes in the global client configuration file /etc/ssh/ssh_config enables the use of the helper program
             ssh-keysign(8) during HostbasedAuthentication.  The argument must be yes or no (the default).  This option should be placed
             in the non-hostspecific section.  See ssh-keysign(8) for more information.

EscapeChar
             Sets the escape character (default: `~').  The escape character can also be set on the command line.  The argument should be
             a single character, `^' followed by a letter, or none to disable the escape character entirely (making the connection
             transparent for binary data).

ExitOnForwardFailure
             Specifies whether ssh(1) should terminate the connection if it cannot set up all requested dynamic, tunnel, local, and remote
             port forwardings, (e.g. if either end is unable to bind and listen on a specified port).  Note that ExitOnForwardFailure does
             not apply to connections made over port forwardings and will not, for example, cause ssh(1) to exit if TCP connections to the
             ultimate forwarding destination fail.  The argument must be yes or no (the default).

FingerprintHash
             Specifies the hash algorithm used when displaying key fingerprints.  Valid options are: md5 and sha256 (the default).

ForkAfterAuthentication
             Requests ssh to go to background just before command execution.  This is useful if ssh is going to ask for passwords or
             passphrases, but the user wants it in the background.  This implies the StdinNull configuration option being set to "yes".
             The recommended way to start X11 programs at a remote site is with something like ssh -f host xterm, which is the same as ssh
             host xterm if the ForkAfterAuthentication configuration option is set to "yes".

             If the ExitOnForwardFailure configuration option is set to "yes", then a client started with the ForkAfterAuthentication
             configuration option being set to "yes" will wait for all remote port forwards to be successfully established before placing
             itself in the background.  The argument to this keyword must be yes (same as the -f option) or no (the default).


ForwardAgent
             Specifies whether the connection to the authentication agent (if any) will be forwarded to the remote machine.  The argument
             may be yes, no (the default), an explicit path to an agent socket or the name of an environment variable (beginning with `$')
             in which to find the path.

             Agent forwarding should be enabled with caution.  Users with the ability to bypass file permissions on the remote host (for
             the agent's Unix-domain socket) can access the local agent through the forwarded connection.  An attacker cannot obtain key
             material from the agent, however they can perform operations on the keys that enable them to authenticate using the
             identities loaded into the agent.

ForwardX11
             Specifies whether X11 connections will be automatically redirected over the secure channel and DISPLAY set.  The argument
             must be yes or no (the default).

             X11 forwarding should be enabled with caution.  Users with the ability to bypass file permissions on the remote host (for the
             user's X11 authorization database) can access the local X11 display through the forwarded connection.  An attacker may then
             be able to perform activities such as keystroke monitoring if the ForwardX11Trusted option is also enabled.

ForwardX11Timeout
             Specify a timeout for untrusted X11 forwarding using the format described in the TIME FORMATS section of sshd_config(5).  X11
             connections received by ssh(1) after this time will be refused.  Setting ForwardX11Timeout to zero will disable the timeout
             and permit X11 forwarding for the life of the connection.  The default is to disable untrusted X11 forwarding after twenty
             minutes has elapsed.

ForwardX11Trusted
             If this option is set to yes, remote X11 clients will have full access to the original X11 display.

             If this option is set to no (the default), remote X11 clients will be considered untrusted and prevented from stealing or
             tampering with data belonging to trusted X11 clients.  Furthermore, the xauth(1) token used for the session will be set to
             expire after 20 minutes.  Remote clients will be refused access after this time.

             See the X11 SECURITY extension specification for full details on the restrictions imposed on untrusted clients.

GatewayPorts
             Specifies whether remote hosts are allowed to connect to local forwarded ports.  By default, ssh(1) binds local port
             forwardings to the loopback address.  This prevents other remote hosts from connecting to forwarded ports.  GatewayPorts can
             be used to specify that ssh should bind local port forwardings to the wildcard address, thus allowing remote hosts to connect
             to forwarded ports.  The argument must be yes or no (the default).

GlobalKnownHostsFile
             Specifies one or more files to use for the global host key database, separated by whitespace.  The default is
             /etc/ssh/ssh_known_hosts, /etc/ssh/ssh_known_hosts2.

GSSAPIAuthentication
             Specifies whether user authentication based on GSSAPI is allowed.  The default is no.

GSSAPIDelegateCredentials
             Forward (delegate) credentials to the server.  The default is no.

HashKnownHosts
             Indicates that ssh(1) should hash host names and addresses when they are added to ~/.ssh/known_hosts.  These hashed names may
             be used normally by ssh(1) and sshd(8), but they do not visually reveal identifying information if the file's contents are
             disclosed.  The default is no.  Note that existing names and addresses in known hosts files will not be converted
             automatically, but may be manually hashed using ssh-keygen(1).

HostbasedAcceptedAlgorithms
             Specifies the signature algorithms that will be used for hostbased authentication as a comma-separated list of patterns.
             Alternately if the specified list begins with a `+' character, then the specified signature algorithms will be appended to
             the default set instead of replacing them.  If the specified list begins with a `-' character, then the specified signature
             algorithms (including wildcards) will be removed from the default set instead of replacing them.  If the specified list
             begins with a `^' character, then the specified signature algorithms will be placed at the head of the default set.  The
             default for this option is:

                ssh-ed25519-cert-v01@openssh.com,
                ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ecdsa-sha2-nistp384-cert-v01@openssh.com,
                ecdsa-sha2-nistp521-cert-v01@openssh.com,
                sk-ssh-ed25519-cert-v01@openssh.com,
                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
                rsa-sha2-512-cert-v01@openssh.com,
                rsa-sha2-256-cert-v01@openssh.com,
                ssh-ed25519,
                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                sk-ssh-ed25519@openssh.com,
                sk-ecdsa-sha2-nistp256@openssh.com,
                rsa-sha2-512,rsa-sha2-256

             The -Q option of ssh(1) may be used to list supported signature algorithms.  This was formerly named HostbasedKeyTypes.

HostbasedAuthentication
             Specifies whether to try rhosts based authentication with public key authentication.  The argument must be yes or no (the
             default).

HostKeyAlgorithms
             Specifies the host key signature algorithms that the client wants to use in order of preference.  Alternately if the
             specified list begins with a `+' character, then the specified signature algorithms will be appended to the default set
             instead of replacing them.  If the specified list begins with a `-' character, then the specified signature algorithms
             (including wildcards) will be removed from the default set instead of replacing them.  If the specified list begins with a
             `^' character, then the specified signature algorithms will be placed at the head of the default set.  The default for this
             option is:

                ssh-ed25519-cert-v01@openssh.com,
                ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ecdsa-sha2-nistp384-cert-v01@openssh.com,
                ecdsa-sha2-nistp521-cert-v01@openssh.com,
                sk-ssh-ed25519-cert-v01@openssh.com,
                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
                rsa-sha2-512-cert-v01@openssh.com,
                rsa-sha2-256-cert-v01@openssh.com,
                ssh-ed25519,
                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                sk-ecdsa-sha2-nistp256@openssh.com,
                sk-ssh-ed25519@openssh.com,
                rsa-sha2-512,rsa-sha2-256

             If hostkeys are known for the destination host then this default is modified to prefer their algorithms.

             The list of available signature algorithms may also be obtained using "ssh -Q HostKeyAlgorithms".

HostKeyAlias
             Specifies an alias that should be used instead of the real host name when looking up or saving the host key in the host key
             database files and when validating host certificates.  This option is useful for tunneling SSH connections or for multiple
             servers running on a single host.

Hostname
             Specifies the real host name to log into.  This can be used to specify nicknames or abbreviations for hosts.  Arguments to
             Hostname accept the tokens described in the TOKENS section.  Numeric IP addresses are also permitted (both on the command
             line and in Hostname specifications).  The default is the name given on the command line.

IdentitiesOnly
             Specifies that ssh(1) should only use the configured authentication identity and certificate files (either the default files,
             or those explicitly configured in the ssh_config files or passed on the ssh(1) command-line), even if ssh-agent(1) or a
             PKCS11Provider or SecurityKeyProvider offers more identities.  The argument to this keyword must be yes or no (the default).
             This option is intended for situations where ssh-agent offers many different identities.

IdentityAgent
             Specifies the UNIX-domain socket used to communicate with the authentication agent.

             This option overrides the SSH_AUTH_SOCK environment variable and can be used to select a specific agent.  Setting the socket
             name to none disables the use of an authentication agent.  If the string "SSH_AUTH_SOCK" is specified, the location of the
             socket will be read from the SSH_AUTH_SOCK environment variable.  Otherwise if the specified value begins with a `$'
             character, then it will be treated as an environment variable containing the location of the socket.

             Arguments to IdentityAgent may use the tilde syntax to refer to a user's home directory, the tokens described in the TOKENS
             section and environment variables as described in the ENVIRONMENT VARIABLES section.

IdentityFile
             Specifies a file from which the user's DSA, ECDSA, authenticator-hosted ECDSA, Ed25519, authenticator-hosted Ed25519 or RSA
             authentication identity is read.  You can also specify a public key file to use the corresponding private key that is loaded
             in ssh-agent(1) when the private key file is not present locally.  The default is ~/.ssh/id_rsa, ~/.ssh/id_ecdsa,
             ~/.ssh/id_ecdsa_sk, ~/.ssh/id_ed25519, ~/.ssh/id_ed25519_sk and ~/.ssh/id_dsa.  Additionally, any identities represented by
             the authentication agent will be used for authentication unless IdentitiesOnly is set.  If no certificates have been
             explicitly specified by CertificateFile, ssh(1) will try to load certificate information from the filename obtained by
             appending -cert.pub to the path of a specified IdentityFile.

             Arguments to IdentityFile may use the tilde syntax to refer to a user's home directory or the tokens described in the TOKENS
             section.

             It is possible to have multiple identity files specified in configuration files; all these identities will be tried in
             sequence.  Multiple IdentityFile directives will add to the list of identities tried (this behaviour differs from that of
             other configuration directives).

             IdentityFile may be used in conjunction with IdentitiesOnly to select which identities in an agent are offered during
             authentication.  IdentityFile may also be used in conjunction with CertificateFile in order to provide any certificate also
             needed for authentication with the identity.

IgnoreUnknown
             Specifies a pattern-list of unknown options to be ignored if they are encountered in configuration parsing.  This may be used
             to suppress errors if ssh_config contains options that are unrecognised by ssh(1).  It is recommended that IgnoreUnknown be
             listed early in the configuration file as it will not be applied to unknown options that appear before it.

Include
             Include the specified configuration file(s).  Multiple pathnames may be specified and each pathname may contain glob(7)
             wildcards and, for user configurations, shell-like `~' references to user home directories.  Wildcards will be expanded and
             processed in lexical order.  Files without absolute paths are assumed to be in ~/.ssh if included in a user configuration
             file or /etc/ssh if included from the system configuration file.  Include directive may appear inside a Match or Host block
             to perform conditional inclusion.

IPQoS   Specifies the IPv4 type-of-service or DSCP class for connections.  Accepted values are af11, af12, af13, af21, af22, af23,
             af31, af32, af33, af41, af42, af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef, le, lowdelay, throughput, reliability, a
             numeric value, or none to use the operating system default.  This option may take one or two arguments, separated by
             whitespace.  If one argument is specified, it is used as the packet class unconditionally.  If two values are specified, the
             first is automatically selected for interactive sessions and the second for non-interactive sessions.  The default is af21
             (Low-Latency Data) for interactive sessions and cs1 (Lower Effort) for non-interactive sessions.

KbdInteractiveAuthentication
             Specifies whether to use keyboard-interactive authentication.  The argument to this keyword must be yes (the default) or no.
             ChallengeResponseAuthentication is a deprecated alias for this.

KbdInteractiveDevices
             Specifies the list of methods to use in keyboard-interactive authentication.  Multiple method names must be comma-separated.
             The default is to use the server specified list.  The methods available vary depending on what the server supports.  For an
             OpenSSH server, it may be zero or more of: bsdauth and pam.

KexAlgorithms
             Specifies the available KEX (Key Exchange) algorithms.  Multiple algorithms must be comma-separated.  If the specified list
             begins with a `+' character, then the specified algorithms will be appended to the default set instead of replacing them.  If
             the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be removed from the
             default set instead of replacing them.  If the specified list begins with a `^' character, then the specified algorithms will
             be placed at the head of the default set.  The default is:

                   sntrup761x25519-sha512@openssh.com,
                   curve25519-sha256,curve25519-sha256@libssh.org,
                   ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
                   diffie-hellman-group-exchange-sha256,
                   diffie-hellman-group16-sha512,
                   diffie-hellman-group18-sha512,
                   diffie-hellman-group14-sha256

             The list of available key exchange algorithms may also be obtained using "ssh -Q kex".

KnownHostsCommand
             Specifies a command to use to obtain a list of host keys, in addition to those listed in UserKnownHostsFile and
             GlobalKnownHostsFile.  This command is executed after the files have been read.  It may write host key lines to standard
             output in identical format to the usual files (described in the VERIFYING HOST KEYS section in ssh(1)).  Arguments to
             KnownHostsCommand accept the tokens described in the TOKENS section.  The command may be invoked multiple times per
             connection: once when preparing the preference list of host key algorithms to use, again to obtain the host key for the
             requested host name and, if CheckHostIP is enabled, one more time to obtain the host key matching the server's address.  If
             the command exits abnormally or returns a non-zero exit status then the connection is terminated.

LocalCommand
             Specifies a command to execute on the local machine after successfully connecting to the server.  The command string extends
             to the end of the line, and is executed with the user's shell.  Arguments to LocalCommand accept the tokens described in the
             TOKENS section.

             The command is run synchronously and does not have access to the session of the ssh(1) that spawned it.  It should not be
             used for interactive commands.

             This directive is ignored unless PermitLocalCommand has been enabled.

LocalForward
             Specifies that a TCP port on the local machine be forwarded over the secure channel to the specified host and port from the
             remote machine.  The first argument specifies the listener and may be [bind_address:]port or a Unix domain socket path.  The
             second argument is the destination and may be host:hostport or a Unix domain socket path if the remote host supports it.

             IPv6 addresses can be specified by enclosing addresses in square brackets.  Multiple forwardings may be specified, and
             additional forwardings can be given on the command line.  Only the superuser can forward privileged ports.  By default, the
             local port is bound in accordance with the GatewayPorts setting.  However, an explicit bind_address may be used to bind the
             connection to a specific address.  The bind_address of localhost indicates that the listening port be bound for local use
             only, while an empty address or `*' indicates that the port should be available from all interfaces.  Unix domain socket
             paths may use the tokens described in the TOKENS section and environment variables as described in the ENVIRONMENT VARIABLES
             section.

LogLevel
             Gives the verbosity level that is used when logging messages from ssh(1).  The possible values are: QUIET, FATAL, ERROR,
             INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.  The default is INFO.  DEBUG and DEBUG1 are equivalent.  DEBUG2 and DEBUG3
             each specify higher levels of verbose output.

LogVerbose
             Specify one or more overrides to LogLevel.  An override consists of a pattern lists that matches the source file, function
             and line number to force detailed logging for.  For example, an override pattern of:

                   kex.c:*:1000,*:kex_exchange_identification():*,packet.c:*

             would enable detailed logging for line 1000 of kex.c, everything in the kex_exchange_identification() function, and all code
             in the packet.c file.  This option is intended for debugging and no overrides are enabled by default.

MACs    Specifies the MAC (message authentication code) algorithms in order of preference.  The MAC algorithm is used for data
             integrity protection.  Multiple algorithms must be comma-separated.  If the specified list begins with a `+' character, then
             the specified algorithms will be appended to the default set instead of replacing them.  If the specified list begins with a
             `-' character, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing
             them.  If the specified list begins with a `^' character, then the specified algorithms will be placed at the head of the
             default set.

             The algorithms that contain "-etm" calculate the MAC after encryption (encrypt-then-mac).  These are considered safer and
             their use recommended.

             The default is:

                   umac-64-etm@openssh.com,umac-128-etm@openssh.com,
                   hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
                   hmac-sha1-etm@openssh.com,
                   umac-64@openssh.com,umac-128@openssh.com,
                   hmac-sha2-256,hmac-sha2-512,hmac-sha1

             The list of available MAC algorithms may also be obtained using "ssh -Q mac".

NoHostAuthenticationForLocalhost
             Disable host authentication for localhost (loopback addresses).  The argument to this keyword must be yes or no (the
             default).

NumberOfPasswordPrompts
             Specifies the number of password prompts before giving up.  The argument to this keyword must be an integer.  The default is
             3.

PasswordAuthentication
             Specifies whether to use password authentication.  The argument to this keyword must be yes (the default) or no.

PermitLocalCommand
             Allow local command execution via the LocalCommand option or using the !command escape sequence in ssh(1).  The argument must
             be yes or no (the default).

PermitRemoteOpen
             Specifies the destinations to which remote TCP port forwarding is permitted when RemoteForward is used as a SOCKS proxy.  The
             forwarding specification must be one of the following forms:

                   PermitRemoteOpen host:port
                   PermitRemoteOpen IPv4_addr:port
                   PermitRemoteOpen [IPv6_addr]:port

             Multiple forwards may be specified by separating them with whitespace.  An argument of any can be used to remove all
             restrictions and permit any forwarding requests.  An argument of none can be used to prohibit all forwarding requests.  The
             wildcard `*' can be used for host or port to allow all hosts or ports respectively.  Otherwise, no pattern matching or
             address lookups are performed on supplied names.

PKCS11Provider
             Specifies which PKCS#11 provider to use or none to indicate that no provider should be used (the default).  The argument to
             this keyword is a path to the PKCS#11 shared library ssh(1) should use to communicate with a PKCS#11 token providing keys for
             user authentication.  Setting PKCS11Provider will disable UseKeychain.

Port    Specifies the port number to connect on the remote host.  The default is 22.

PreferredAuthentications
             Specifies the order in which the client should try authentication methods.  This allows a client to prefer one method (e.g.
             keyboard-interactive) over another method (e.g. password).  The default is:

                   gssapi-with-mic,hostbased,publickey,
                   keyboard-interactive,password

ProxyCommand
             Specifies the command to use to connect to the server.  The command string extends to the end of the line, and is executed
             using the user's shell `exec' directive to avoid a lingering shell process.

             Arguments to ProxyCommand accept the tokens described in the TOKENS section.  The command can be basically anything, and
             should read from its standard input and write to its standard output.  It should eventually connect an sshd(8) server running
             on some machine, or execute sshd -i somewhere.  Host key management will be done using the Hostname of the host being
             connected (defaulting to the name typed by the user).  Setting the command to none disables this option entirely.  Note that
             CheckHostIP is not available for connects with a proxy command.

             This directive is useful in conjunction with nc(1) and its proxy support.  For example, the following directive would connect
             via an HTTP proxy at 192.0.2.0:

                ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p

ProxyJump
             Specifies one or more jump proxies as either [user@]host[:port] or an ssh URI.  Multiple proxies may be separated by comma
             characters and will be visited sequentially.  Setting this option will cause ssh(1) to connect to the target host by first
             making a ssh(1) connection to the specified ProxyJump host and then establishing a TCP forwarding to the ultimate target from
             there.  Setting the host to none disables this option entirely.

             Note that this option will compete with the ProxyCommand option - whichever is specified first will prevent later instances
             of the other from taking effect.

             Note also that the configuration for the destination host (either supplied via the command-line or the configuration file) is
             not generally applied to jump hosts.  ~/.ssh/config should be used if specific configuration is required for jump hosts.

ProxyUseFdpass
             Specifies that ProxyCommand will pass a connected file descriptor back to ssh(1) instead of continuing to execute and pass
             data.  The default is no.

PubkeyAcceptedAlgorithms
             Specifies the signature algorithms that will be used for public key authentication as a comma-separated list of patterns.  If
             the specified list begins with a `+' character, then the algorithms after it will be appended to the default instead of
             replacing it.  If the specified list begins with a `-' character, then the specified algorithms (including wildcards) will be
             removed from the default set instead of replacing them.  If the specified list begins with a `^' character, then the
             specified algorithms will be placed at the head of the default set.  The default for this option is:

                ssh-ed25519-cert-v01@openssh.com,
                ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ecdsa-sha2-nistp384-cert-v01@openssh.com,
                ecdsa-sha2-nistp521-cert-v01@openssh.com,
                sk-ssh-ed25519-cert-v01@openssh.com,
                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
                rsa-sha2-512-cert-v01@openssh.com,
                rsa-sha2-256-cert-v01@openssh.com,
                ssh-ed25519,
                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                sk-ssh-ed25519@openssh.com,
                sk-ecdsa-sha2-nistp256@openssh.com,
                rsa-sha2-512,rsa-sha2-256

             The list of available signature algorithms may also be obtained using "ssh -Q PubkeyAcceptedAlgorithms".

PubkeyAuthentication
             Specifies whether to try public key authentication.  The argument to this keyword must be yes (the default), no, unbound or
             host-bound.  The final two options enable public key authentication while respectively disabling or enabling the OpenSSH
             host-bound authentication protocol extension required for restricted ssh-agent(1) forwarding.

RekeyLimit
             Specifies the maximum amount of data that may be transmitted or received before the session key is renegotiated, optionally
             followed by a maximum amount of time that may pass before the session key is renegotiated.  The first argument is specified
             in bytes and may have a suffix of `K', `M', or `G' to indicate Kilobytes, Megabytes, or Gigabytes, respectively.  The default
             is between `1G' and `4G', depending on the cipher.  The optional second value is specified in seconds and may use any of the
             units documented in the TIME FORMATS section of sshd_config(5).  The default value for RekeyLimit is default none, which
             means that rekeying is performed after the cipher's default amount of data has been sent or received and no time based
             rekeying is done.

RemoteCommand
             Specifies a command to execute on the remote machine after successfully connecting to the server.  The command string extends
             to the end of the line, and is executed with the user's shell.  Arguments to RemoteCommand accept the tokens described in the
             TOKENS section.

RemoteForward
             Specifies that a TCP port on the remote machine be forwarded over the secure channel.  The remote port may either be
             forwarded to a specified host and port from the local machine, or may act as a SOCKS 4/5 proxy that allows a remote client to
             connect to arbitrary destinations from the local machine.  The first argument is the listening specification and may be
             [bind_address:]port or, if the remote host supports it, a Unix domain socket path.  If forwarding to a specific destination
             then the second argument must be host:hostport or a Unix domain socket path, otherwise if no destination argument is
             specified then the remote forwarding will be established as a SOCKS proxy.  When acting as a SOCKS proxy, the destination of
             the connection can be restricted by PermitRemoteOpen.

             IPv6 addresses can be specified by enclosing addresses in square brackets.  Multiple forwardings may be specified, and
             additional forwardings can be given on the command line.  Privileged ports can be forwarded only when logging in as root on
             the remote machine.  Unix domain socket paths may use the tokens described in the TOKENS section and environment variables as
             described in the ENVIRONMENT VARIABLES section.

             If the port argument is 0, the listen port will be dynamically allocated on the server and reported to the client at run
             time.

             If the bind_address is not specified, the default is to only bind to loopback addresses.  If the bind_address is `*' or an
             empty string, then the forwarding is requested to listen on all interfaces.  Specifying a remote bind_address will only
             succeed if the server's GatewayPorts option is enabled (see sshd_config(5)).

RequestTTY
             Specifies whether to request a pseudo-tty for the session.  The argument may be one of: no (never request a TTY), yes (always
             request a TTY when standard input is a TTY), force (always request a TTY) or auto (request a TTY when opening a login
             session).  This option mirrors the -t and -T flags for ssh(1).

RequiredRSASize
             Specifies the minimum RSA key size (in bits) that ssh(1) will accept.  User authentication keys smaller than this limit will
             be ignored.  Servers that present host keys smaller than this limit will cause the connection to be terminated.  The default
             is 1024 bits.  Note that this limit may only be raised from the default.

RevokedHostKeys
             Specifies revoked host public keys.  Keys listed in this file will be refused for host authentication.  Note that if this
             file does not exist or is not readable, then host authentication will be refused for all hosts.  Keys may be specified as a
             text file, listing one public key per line, or as an OpenSSH Key Revocation List (KRL) as generated by ssh-keygen(1).  For
             more information on KRLs, see the KEY REVOCATION LISTS section in ssh-keygen(1).  Arguments to RevokedHostKeys may use the
             tilde syntax to refer to a user's home directory, the tokens described in the TOKENS section and environment variables as
             described in the ENVIRONMENT VARIABLES section.

SecurityKeyProvider
             Specifies a path to a library that will be used when loading any FIDO authenticator-hosted keys, overriding the default of
             using the built-in USB HID support.

             If the specified value begins with a `$' character, then it will be treated as an environment variable containing the path to
             the library.

SendEnv
             Specifies what variables from the local environ(7) should be sent to the server.  The server must also support it, and the
             server must be configured to accept these environment variables.  Note that the TERM environment variable is always sent
             whenever a pseudo-terminal is requested as it is required by the protocol.  Refer to AcceptEnv in sshd_config(5) for how to
             configure the server.  Variables are specified by name, which may contain wildcard characters.  Multiple environment
             variables may be separated by whitespace or spread across multiple SendEnv directives.

             See PATTERNS for more information on patterns.

             It is possible to clear previously set SendEnv variable names by prefixing patterns with -.  The default is not to send any
             environment variables.

ServerAliveCountMax
             Sets the number of server alive messages (see below) which may be sent without ssh(1) receiving any messages back from the
             server.  If this threshold is reached while server alive messages are being sent, ssh will disconnect from the server,
             terminating the session.  It is important to note that the use of server alive messages is very different from TCPKeepAlive
             (below).  The server alive messages are sent through the encrypted channel and therefore will not be spoofable.  The TCP
             keepalive option enabled by TCPKeepAlive is spoofable.  The server alive mechanism is valuable when the client or server
             depend on knowing when a connection has become unresponsive.

             The default value is 3.  If, for example, ServerAliveInterval (see below) is set to 15 and ServerAliveCountMax is left at the
             default, if the server becomes unresponsive, ssh will disconnect after approximately 45 seconds.

ServerAliveInterval
             Sets a timeout interval in seconds after which if no data has been received from the server, ssh(1) will send a message
             through the encrypted channel to request a response from the server.  The default is 0, indicating that these messages will
             not be sent to the server.

SessionType
             May be used to either request invocation of a subsystem on the remote system, or to prevent the execution of a remote command
             at all.  The latter is useful for just forwarding ports.  The argument to this keyword must be none (same as the -N option),
             subsystem (same as the -s option) or default (shell or command execution).

SetEnv  Directly specify one or more environment variables and their contents to be sent to the server.  Similarly to SendEnv, with
             the exception of the TERM variable, the server must be prepared to accept the environment variable.

StdinNull
             Redirects stdin from /dev/null (actually, prevents reading from stdin).  Either this or the equivalent -n option must be used
             when ssh is run in the background.  The argument to this keyword must be yes (same as the -n option) or no (the default).

StreamLocalBindMask
             Sets the octal file creation mode mask (umask) used when creating a Unix-domain socket file for local or remote port
             forwarding.  This option is only used for port forwarding to a Unix-domain socket file.

             The default value is 0177, which creates a Unix-domain socket file that is readable and writable only by the owner.  Note
             that not all operating systems honor the file mode on Unix-domain socket files.

StreamLocalBindUnlink
             Specifies whether to remove an existing Unix-domain socket file for local or remote port forwarding before creating a new
             one.  If the socket file already exists and StreamLocalBindUnlink is not enabled, ssh will be unable to forward the port to
             the Unix-domain socket file.  This option is only used for port forwarding to a Unix-domain socket file.

             The argument must be yes or no (the default).

StrictHostKeyChecking
             If this flag is set to yes, ssh(1) will never automatically add host keys to the ~/.ssh/known_hosts file, and refuses to
             connect to hosts whose host key has changed.  This provides maximum protection against man-in-the-middle (MITM) attacks,
             though it can be annoying when the /etc/ssh/ssh_known_hosts file is poorly maintained or when connections to new hosts are
             frequently made.  This option forces the user to manually add all new hosts.

             If this flag is set to accept-new then ssh will automatically add new host keys to the user's known_hosts file, but will not
             permit connections to hosts with changed host keys.  If this flag is set to no or off, ssh will automatically add new host
             keys to the user known hosts files and allow connections to hosts with changed hostkeys to proceed, subject to some
             restrictions.  If this flag is set to ask (the default), new host keys will be added to the user known host files only after
             the user has confirmed that is what they really want to do, and ssh will refuse to connect to hosts whose host key has
             changed.  The host keys of known hosts will be verified automatically in all cases.

SyslogFacility
             Gives the facility code that is used when logging messages from ssh(1).  The possible values are: DAEMON, USER, AUTH, LOCAL0,
             LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7.  The default is USER.

TCPKeepAlive
             Specifies whether the system should send TCP keepalive messages to the other side.  If they are sent, death of the connection
             or crash of one of the machines will be properly noticed.  However, this means that connections will die if the route is down
             temporarily, and some people find it annoying.

             The default is yes (to send TCP keepalive messages), and the client will notice if the network goes down or the remote host
             dies.  This is important in scripts, and many users want it too.

             To disable TCP keepalive messages, the value should be set to no.  See also ServerAliveInterval for protocol-level
             keepalives.

Tag     Specify a configuration tag name that may be later used by a Match directive to select a block of configuration.

Tunnel  Request tun(4) device forwarding between the client and the server.  The argument must be yes, point-to-point (layer 3),
             ethernet (layer 2), or no (the default).  Specifying yes requests the default tunnel mode, which is point-to-point.

TunnelDevice
             Specifies the tun(4) devices to open on the client (local_tun) and the server (remote_tun).

             The argument must be local_tun[:remote_tun].  The devices may be specified by numerical ID or the keyword any, which uses the
             next available tunnel device.  If remote_tun is not specified, it defaults to any.  The default is any:any.

UpdateHostKeys
             Specifies whether ssh(1) should accept notifications of additional hostkeys from the server sent after authentication has
             completed and add them to UserKnownHostsFile.  The argument must be yes, no or ask.  This option allows learning alternate
             hostkeys for a server and supports graceful key rotation by allowing a server to send replacement public keys before old ones
             are removed.

             Additional hostkeys are only accepted if the key used to authenticate the host was already trusted or explicitly accepted by
             the user, the host was authenticated via UserKnownHostsFile (i.e. not GlobalKnownHostsFile) and the host was authenticated
             using a plain key and not a certificate.

             UpdateHostKeys is enabled by default if the user has not overridden the default UserKnownHostsFile setting and has not
             enabled VerifyHostKeyDNS, otherwise UpdateHostKeys will be set to no.

             If UpdateHostKeys is set to ask, then the user is asked to confirm the modifications to the known_hosts file.  Confirmation
             is currently incompatible with ControlPersist, and will be disabled if it is enabled.

             Presently, only sshd(8) from OpenSSH 6.8 and greater support the "hostkeys@openssh.com" protocol extension used to inform the
             client of all the server's hostkeys.

UseKeychain
             On macOS, specifies whether the system should search for passphrases in the user's keychain when attempting to use a
             particular key. When the passphrase is provided by the user, this option also specifies whether the passphrase should be
             stored into the keychain once it has been verified to be correct.  The argument must be "yes" or "no".  The default is "no".
             Incompatible with PKCS11Provider.

User    Specifies the user to log in as.  This can be useful when a different user name is used on different machines.  This saves
             the trouble of having to remember to give the user name on the command line.

UserKnownHostsFile
             Specifies one or more files to use for the user host key database, separated by whitespace.  Each filename may use tilde
             notation to refer to the user's home directory, the tokens described in the TOKENS section and environment variables as
             described in the ENVIRONMENT VARIABLES section.  A value of none causes ssh(1) to ignore any user-specific known hosts files.
             The default is ~/.ssh/known_hosts, ~/.ssh/known_hosts2.

VerifyHostKeyDNS
             Specifies whether to verify the remote key using DNS and SSHFP resource records.  If this option is set to yes, the client
             will implicitly trust keys that match a secure fingerprint from DNS.  Insecure fingerprints will be handled as if this option
             was set to ask.  If this option is set to ask, information on fingerprint match will be displayed, but the user will still
             need to confirm new host keys according to the StrictHostKeyChecking option.  The default is no.

             See also VERIFYING HOST KEYS in ssh(1).

VisualHostKey
             If this flag is set to yes, an ASCII art representation of the remote host key fingerprint is printed in addition to the
             fingerprint string at login and for unknown host keys.  If this flag is set to no (the default), no fingerprint strings are
             printed at login and only the fingerprint string will be printed for unknown host keys.

XAuthLocation
             Specifies the full pathname of the xauth(1) program.  The default is /usr/X11R6/bin/xauth.


PATTERNS
     A pattern consists of zero or more non-whitespace characters, `*' (a wildcard that matches zero or more characters), or `?' (a
     wildcard that matches exactly one character).  For example, to specify a set of declarations for any host in the ".co.uk" set of
     domains, the following pattern could be used:

           Host *.co.uk

     The following pattern would match any host in the 192.168.0.[0-9] network range:

           Host 192.168.0.?

     A pattern-list is a comma-separated list of patterns.  Patterns within pattern-lists may be negated by preceding them with an
     exclamation mark (`!').  For example, to allow a key to be used from anywhere within an organization except from the "dialup" pool,
     the following entry (in authorized_keys) could be used:

           from="!*.dialup.example.com,*.example.com"

     Note that a negated match will never produce a positive result by itself.  For example, attempting to match "host3" against the
     following pattern-list will fail:

           from="!host1,!host2"

     The solution here is to include a term that will yield a positive match, such as a wildcard:

           from="!host1,!host2,*"

TOKENS
     Arguments to some keywords can make use of tokens, which are expanded at runtime:

           %%    A literal `%'.
           %C    Hash of %l%h%p%r.
           %d    Local user's home directory.
           %f    The fingerprint of the server's host key.
           %H    The known_hosts hostname or address that is being searched for.
           %h    The remote hostname.
           %I    A string describing the reason for a KnownHostsCommand execution: either ADDRESS when looking up a host by address (only
                 when CheckHostIP is enabled), HOSTNAME when searching by hostname, or ORDER when preparing the host key algorithm
                 preference list to use for the destination host.
           %i    The local user ID.
           %K    The base64 encoded host key.
           %k    The host key alias if specified, otherwise the original remote hostname given on the command line.
           %L    The local hostname.
           %l    The local hostname, including the domain name.
           %n    The original remote hostname, as given on the command line.
           %p    The remote port.
           %r    The remote username.
           %T    The local tun(4) or tap(4) network interface assigned if tunnel forwarding was requested, or "NONE" otherwise.
           %t    The type of the server host key, e.g.  ssh-ed25519.
           %u    The local username.

     CertificateFile, ControlPath, IdentityAgent, IdentityFile, KnownHostsCommand, LocalForward, Match exec, RemoteCommand, RemoteForward,
     RevokedHostKeys, and UserKnownHostsFile accept the tokens %%, %C, %d, %h, %i, %k, %L, %l, %n, %p, %r, and %u.

     KnownHostsCommand additionally accepts the tokens %f, %H, %I, %K and %t.

     Hostname accepts the tokens %% and %h.

     LocalCommand accepts all tokens.

     ProxyCommand and ProxyJump accept the tokens %%, %h, %n, %p, and %r.

ENVIRONMENT VARIABLES
     Arguments to some keywords can be expanded at runtime from environment variables on the client by enclosing them in ${}, for example
     ${HOME}/.ssh would refer to the user's .ssh directory.  If a specified environment variable does not exist then an error will be
     returned and the setting for that keyword will be ignored.

     The keywords CertificateFile, ControlPath, IdentityAgent, IdentityFile, KnownHostsCommand, and UserKnownHostsFile support environment
     variables.  The keywords LocalForward and RemoteForward support environment variables only for Unix domain socket paths.

FILES
     ~/.ssh/config
             This is the per-user configuration file.  The format of this file is described above.  This file is used by the SSH client.
             Because of the potential for abuse, this file must have strict permissions: read/write for the user, and not writable by
             others.

     /etc/ssh/ssh_config
             Systemwide configuration file.  This file provides defaults for those values that are not specified in the user's
             configuration file, and for those users who do not have a configuration file.  This file must be world-readable.

SEE ALSO
     ssh(1)

macOS 14.1   July 17, 2023  

     ~/.ssh/config
     ~/.ssh/config

     /etc/ssh/ssh_config
             Systemwide configuration file.  This file provides defaults for those values that are not specified in the user's
             configuration file, and for those users who do not have a configuration file.  This file must be world-readable.

SEE 
     ssh

macOS 14.1             July 17, 2023