The following is a list of control sequences recognized by screen.  "(V)" and "(A)" indicate
       VT100-specific and ANSI- or ISO-specific functions, respectively.


       ESC E                      Next Line 
       ESC D                      Index 
       ESC M                      Reverse Index 
       ESC H                      Horizontal Tab Set 
       ESC Z                      Send VT100 Identification String 
       ESC 7                 (V)  Save Cursor and Attributes 
       ESC 8                 (V)  Restore Cursor and Attributes 
       ESC [s                (A)  Save Cursor and Attributes 
       ESC [u                (A)  Restore Cursor and Attributes 
       ESC c                      Reset to Initial State 
       ESC g                      Visual Bell 
       ESC Pn p                   Cursor Visibility (97801) 
           Pn = 6                 Invisible 
                7                 Visible 
       ESC =                 (V)  Application Keypad Mode 
       ESC >                 (V)  Numeric Keypad Mode 
       ESC # 8               (V)  Fill Screen with E's 
       ESC \                 (A)  String Terminator 
       ESC ^                 (A)  Privacy Message String (Message Line) 
       ESC !                      Global Message String (Message Line) 
       ESC k                      A.k.a. Definition String 
       ESC P                 (A)  Device  Control  String.   Outputs  a string directly to the host terminal without interpretation.  
       ESC _                 (A)  Application Program Command (Hardstatus) 
       ESC ] 0 ; string ^G   (A)  Operating System Command (Hardstatus, xterm title hack) 
       ESC ] 83 ; cmd ^G     (A)  Execute screen command. This only works if multi-user support  is
                                  compiled into screen. The pseudo-user ":window:" is used to check
                                  the access control list. Use "addacl :window: -rwx #?" to  create
                                  a user with no rights and allow only the needed commands.

       Control-N             (A)  Lock Shift G1 (SO) 
       Control-O             (A)  Lock Shift G0 (SI)

       ESC n                 (A)  Lock Shift G2 
       ESC o                 (A)  Lock Shift G3 
       ESC N                 (A)  Single Shift G2 
       ESC O                 (A)  Single Shift G3 
       ESC ( Pcs             (A)  Designate character set as G0 
       ESC ) Pcs             (A)  Designate character set as G1 
       ESC * Pcs             (A)  Designate character set as G2 
       ESC + Pcs             (A)  Designate character set as G3 
       ESC [ Pn ; Pn H            Direct Cursor Addressing 
       ESC [ Pn ; Pn f            same as above 
       ESC [ Pn J                 Erase in Display 
             Pn = None or 0       From Cursor to End of Screen 
                  1               From Beginning of Screen to Cursor 
                  2               Entire Screen

       ESC [ Pn K                 Erase in Line 
             Pn = None or 0       From Cursor to End of Line 
                  1               From Beginning of Line to Cursor 
                  2               Entire Line

       ESC [ Pn X                 Erase character 
       ESC [ Pn A                 Cursor Up 
       ESC [ Pn B                 Cursor Down 
       ESC [ Pn C                 Cursor Right 
       ESC [ Pn D                 Cursor Left 
       ESC [ Pn E                 Cursor next line 
       ESC [ Pn F                 Cursor previous line 
       ESC [ Pn G                 Cursor horizontal position 
       ESC [ Pn `                 same as above 
       ESC [ Pn d                 Cursor vertical position 
       ESC [ Ps ;...; Ps m        Select Graphic Rendition

             Ps = None or 0       Default Rendition 
                  1               Bold 
                  2          (A)  Faint 
                  3          (A)  Standout Mode (ANSI: Italicized) 
                  4               Underlined 
                  5               Blinking 
                  7               Negative Image 
                  22         (A)  Normal Intensity 
                  23         (A)  Standout Mode off (ANSI: Italicized off) 
                  24         (A)  Not Underlined 
                  25         (A)  Not Blinking 
                  27         (A)  Positive Image 
                  30         (A)  Foreground Black 
                  31         (A)  Foreground Red 
                  32         (A)  Foreground Green 
                  33         (A)  Foreground Yellow 
                  34         (A)  Foreground Blue 
                  35         (A)  Foreground Magenta 
                  36         (A)  Foreground Cyan 
                  37         (A)  Foreground White 
                  39         (A)  Foreground Default 
                  40         (A)  Background Black 
                  ...

                  49         (A)  Background Default

       ESC [ Pn g                 Tab Clear 
             Pn = None or 0       Clear Tab at Current Position 
                  3               Clear All Tabs

       ESC [ Pn ; Pn r       (V)  Set Scrolling Region 
       ESC [ Pn I            (A)  Horizontal Tab 
       ESC [ Pn Z            (A)  Backward Tab 
       ESC [ Pn L            (A)  Insert Line 
       ESC [ Pn M            (A)  Delete Line 
       ESC [ Pn @            (A)  Insert Character 
       ESC [ Pn P            (A)  Delete Character 
       ESC [ Pn S                 Scroll Scrolling Region Up 
       ESC [ Pn T                 Scroll Scrolling Region Down 
       ESC [ Pn ^                 same as above 
       ESC [ Ps ;...; Ps h        Set Mode 
       ESC [ Ps ;...; Ps l        Reset Mode 
             Ps = 4          (A)  Insert Mode 
                  20         (A)  Automatic Linefeed Mode 
                  34              Normal Cursor Visibility 
                  ?1         (V)  Application Cursor Keys 
                  ?3         (V)  Change Terminal Width to 132 columns 
                  ?5         (V)  Reverse Video 
                  ?6         (V)  Origin Mode 
                  ?7         (V)  Wrap Mode 
                  ?9              X10 mouse tracking 
                  ?25        (V)  Visible Cursor 
                  ?47             Alternate Screen (old xterm code) 
                  ?1000      (V)  VT200 mouse tracking 
                  ?1047           Alternate Screen (new xterm code) 
                  ?1049           Alternate Screen (new xterm code)

       ESC [ 5 i             (A)  Start relay to printer (ANSI Media Copy) 
       ESC [ 4 i             (A)  Stop relay to printer (ANSI Media Copy) 
       ESC [ 8 ; Ph ; Pw t        Resize  the  window  to `Ph' lines and `Pw' columns (SunView special) 
       ESC [ c                    Send VT100 Identification String 
       ESC [ x                    Send Terminal Parameter Report 
       ESC [ > c                  Send VT220 Secondary Device Attributes String 
       ESC [ 6 n                  Send Cursor Position Report