chip | DIO | PWM | Analog | osc | USB | power | reset | ICSP | FTDI | LEDs | tx, rx LED | Flash | RAM | EEPROM | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Leonardo $20 | ATmega32u4 | 20 PC7,8 only0-6 doen't exist PE2,6 onlyothers doen't exist | 7 | 12 PF0,1,4,5,6,7 anti numbered | 16mhz crystal | micro | jack USB | button HWB HardWareBoot-USB ISCP | L 13 | rx,tx,on
| 32k | 2.5k | 1k
| Uno
HVW | ATmega328
| 14 | 6 | 6 | 16MHZ xtl | B
does not use the FTDI USB‑to‑serial driver chip. Instead, a Atmega8U2 programmed as a USB‑to‑serial converter. | 2.1mm center positive | button | header |
|
| 32k | 2k | 1k
| Ethernet | schematic SolderPad.com MC33269-5 regulator, max input 20v, dropout 1.1V(i.e. minis 6.1V) See 32 MLF Top View includes ADC6 and ADC7 ATmega328 |
d0-9 | Pins 10, 11, 12 and 13 for Ethernet(SPI) 2 W5100 interrupt (when bridged) 4 | 6 | 16MHZ xtl | noUSB | 2.1mm center positive | optional Power over Ethernet (POE) button | header | PB1/OC1A LED | PD4 is | SD_CS
Freeduino
| Ethernut | ATmega128 | Port E | Ports A & C used for address bus for external memory PWM | port F
| 14.7456 MHz | USB | power | reset | ICSP | no FTDI | LEDs
$175 AUD
| Diecimila |
| Protoduino | img
|
| 7.5-9
| Mega | Atmega128 or 256
| Pro
| Promini
| iFIO | XBee headeer, LiPo battery connector.
| Ardweeny site | manual ATmega328 | choose nano/328 D0-13 | 0-5 | 16MHZ | ceramic no USB
| FTDI | LED button | FTDI | D13 | No LED | RxD TxD LilyPad 03 |
| LilyPad 04 |
| LilyPad 02 |
| Extreme |
| NG (Nuova Generazione) |
| Atmega32u4 Breakout board+ | |
B0-7,D0-7, F0,1,4-7 |
| Teensy++ | PJRC AT90USB1286 |
B0-6,D0-7, F0,1,4-7 46 | 9 | 8 | 16MHz | USB |
| 130k | 8k | 4k
| Teensy | PJRC ATmega32u4 |
B0-6,D0-7, F0,1,4-7 25 | 7 | 12 | 16MHz | USB |
| 32k | 2k | 1k
| Sparguino | Leonardo atmega32u4 |
| | ATtiny2313 | 20 pin 18 | 4 Touch 4 | 0 | 20MHz | no | 1.8-5.5 | | |
| 2K | 128B | 128B
| Gboard |
ATMega328P | GPRS XBeesocket D0-D7 unavailable | no
| PWR, Status, NET
| Iteaduino | img Manual$26
ATmega328P | D0-13 | | A0-5 |
16MHz | xtl mini | Select | 5 or 3.3 7-23 LED button | "easier access then Duemilanove" ISCP | additional headers:D0-13, SDA,SCL, Tx,Rx No FTDI | D13 | TX, RX
| Usnoobie | $16
| Sanguino | atmega644Pi |
atmega2560 Arduino mega
atmega1280 Arduino mega
atmega128 Amber128 http://www.soc-robotics.com/
atmega32 Penguino-AVR http://www.icy.com.au/
atmega2561 Boston Android http://www.bostonandroid.com/EVAL-USB-2561.html
64k flash |
| Wiring-S | wiring.org.co Not Arduino nano |
| mini |
| serial
| BT BlueTooth
| Severino |
| stamp |
| |